Home
RoofingThe roof is supplied with 20 mm-thick roof boarding of solid wood roofing with roof shingles.
Roof greening not only looks good, it also provides many benefits. This roofing protects against the elements, reduces the noise of precipitation, and looks great in a natural environment.Make sure to water regularly during the growth phase (depending on environmental influences). The substrate must be kept sufficiently moist until the roots are established.Included in delivery:Sedum sprouts (mix of 3-4 types, which vary according to time of year)SubstrateFilter fiberstorage mats (Biodrain)Aluminium collection stripNote:Please be aware that roof greening adds a load of approx. 50 kg/m². The structure must have capacity to bear this weight. It may become necessary to mount the increased snow load. It is optionally available. Roof greening is separately supplied and can only be delivered in Germany.Roof greening system390 x 700 cmIncluding substrateincluding filter fiberIncludinig storage mats (Biodrain)
delivery time: 3-4 weeks
SKAN HOLZ Canopy extension to a depth of 212 cmProduct featuresSuitable for SKAN HOLZ log cabins in the Bern range (Roof can be insulated (for roof tiles))Width: 420 cmSturdy structure thanks to wall planks in the gable triangle and moulded corner connectionsMaterial: Nordic spruceUntreated in color2 posts 12 x 12 cm19 mm roof boarding with counter-battens and roof battens1 layer of roofing felt for initial coveringCanopy extension in Bern420 cm wideRoof can be insulated (for roof tiles) in Bern45 and over
delivery time: 5-6 weeks
Would you like clear view of the sky?Then choose roofing with real glass!SKAN HOLZ roof glazing with laminated safety glass (LSG), in a thickness of 10 mm for terrace roofs, is supplied with aluminium profile, sealing rubber and mounting material. The glass panels are 105 cm wide and are split in the center. Roofing with real glass is optionally available in the series Andria, Ancona, Siena and Sanremo.Please notePlease be aware that there is a surcharge. The Polycarbonate sheets of terrace roofing are exchanged for the laminated safety glass. The glass is delivered separately and only within Germany.Surcharge for glass covering VSG10mm648 x 250 cmSupplied with aluminium profileInclusing sealing rubber
delivery time: 3-4 weeks
Would you like clear view of the sky?Then choose roofing with real glass!SKAN HOLZ roof glazing with laminated safety glass (LSG), in a thickness of 10 mm for terrace roofs, is supplied with aluminium profile, sealing rubber and mounting material. The glass panels are 105 cm wide and are split in the center. Roofing with real glass is optionally available in the series Andria, Ancona, Siena and Sanremo.Please notePlease be aware that there is a surcharge. The Polycarbonate sheets of terrace roofing are exchanged for the laminated safety glass. The glass is delivered separately and only within Germany.Surcharge for glass covering VSG10mm541 x 300 cmSupplied with aluminium profileInclusing sealing rubber
delivery time: 3-4 weeks
Storeroom of profiled siding material (for installation under a SKAN HOLZ carport)Profiled siding consists of loose tongued and grooved timber in 20 mm thickness, which is attached to one another and mounted between the posts.Product featuresWidth: 573 cmDepth: 317 cmHeight: 200 cmdoor (door clear opening 94 x 190 cm)Thickness: 20 mmpost including H-post anchorposts marked with red are available for carportsCustomer can easily adapt when installing into a carport with narrow passage widthMaterial: sprucecolour-treated in walnutConstructionThe construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Storeroom C6573 x 317 cmProfiled siding materialColour-treated in walnut
delivery time: 4-5 weeks
With the Garda terrace roof, you can create an elegant and weather-protected outdoor area with clear, modern lines. The high-quality aluminium structure in anthracite (DB703) impresses with its durable quality, easy-care surface and contemporary design, which blends harmoniously into different house and garden situations. Generous protection area for patios, seating or lounge areas Sturdy aluminium construction for long-term reliable use Anthracite powder-coated for a modern and elegant look 16 mm polycarbonate multiwall sheets in clear for a pleasant incidence of light Integrated rain gutter for controlled water drainage Lugs made of galvanised flat steel enable secure anchoring in the point foundations to be created on siteThe structure is designed for long-lasting outdoor use. The strong 11 x 11 cm posts provide a solid base, while the modern profile design of the canopy creates a high-quality overall impression. Thanks to the integrated wall end profile, the canopy fits neatly against the house wall.The roof covering made of robust polycarbonate sheets offers balanced protection against the weather while allowing sufficient daylight to pass through. It is attached using high-quality aluminium profiles with EPDM lip seals, which contributes to the stability and durability of the overall construction.The flexible design of the water drain is particularly practical: this can be routed either inside or outside the posts. This allows the terrace roof to be adapted to the structural conditions. The post brackets made of galvanised flat steel included in the scope of delivery enable secure installation by setting in concrete.The SKAN HOLZ Garda terrace roof is the perfect solution for anyone who values high-quality materials, a well thought-out structure and a modern appearance. Please note that the wall fastening material is not included in the scope of delivery.structureThe powder-coated aluminium kit features posts with a cross-section of 11 x 11 cm and a rounded front. The structure is characterised by distinctive profile lines.The gutter is integrated into the purlin.Roof coveringThe roof cladding consists of 16 mm thick polycarbonate multiwall sheets. The upper surface is coated with a UV-reflective layer. These are secured using aluminium profiles with EPDM lip seals.BracingThe building kit includes galvanized flat-steel post anchors. They are screwed into the support, embedded in concrete and ensure secure connection to the subsurface.Roofing: Polycarbonate sheet in clearAluminium structure, powder coated in anthracitemodern design with distinctive profileGutter integrated into the purlinIncluding fishplates for embedding in concrete
delivery time: 3-4 weeks
The SKAN HOLZ snow load extension consists of additional rafters that you mount between the existing roof rafters. This reduces the rafter spacing of the carport and increases the overall load-bearing capacity. The number and size of the rafters varies depending on the carport.The snow load increase raises the snow load of the carport to 2.0 kN/m².This snow load increase contains 6 additional rafters and is suitable for the following models:Emsland carport 609 (613) x 846 cmWendland carport 630 x 879 cmSpessart carport 611 x 846 cmColour-treated in light oakPlease note:The snow load cannot be retrofitted to the carports. Please check the snow load limit required in your residential area before assembly.ConstructionThe construction is made of glued laminate timber, consisting of several dried layers, attached to one another with finger-jointing. They are glued onto one another for weather-resistance. This results in a load-bearing beam which is more resistant to warping and less prone to fissures than naturally grown wood.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Snow load increase to sk=2.00 kN/m²Glued laminated timber, colour-treated in light oakSuitable for Emsland carport 609 (613) x 846 cmSuitable for Wendland carport 630 x 879 cmSuitable for carport Spessart 611 x 846 cm
delivery time: 4-5 weeks
The SKAN HOLZ snow load extension consists of additional rafters that you mount between the existing roof rafters. This reduces the rafter spacing of the carport and increases the overall load-bearing capacity. The number and size of the rafters varies depending on the carport.The snow load increase raises the snow load of the carport to 2.0 kN/m².This snow load increase contains 6 additional rafters and is suitable for the following models:Emsland carport 609 (613) x 846 cmWendland carport 630 x 879 cmSpessart carport 611 x 846 cmColour-treated in walnutPlease note:The snow load cannot be retrofitted to the carports. Please check the snow load limit required in your residential area before assembly.ConstructionThe construction is made of glued laminate timber, consisting of several dried layers, attached to one another with finger-jointing. They are glued onto one another for weather-resistance. This results in a load-bearing beam which is more resistant to warping and less prone to fissures than naturally grown wood.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Snow load increase to sk=2.00 kN/m²Glued laminated timber, colour-treated in walnutSuitable for Emsland carport 609 (613) x 846 cmSuitable for Wendland carport 630 x 879 cmSuitable for carport Spessart 611 x 846 cm
delivery time: 4-5 weeks
Roof greening not only looks good, it also provides many benefits. This roofing protects against the elements, reduces the noise of precipitation, and looks great in a natural environment.Make sure to water regularly during the growth phase (depending on environmental influences). The substrate must be kept sufficiently moist until the roots are established.Included in delivery:Sedum sprouts (mix of 3-4 types, which vary according to time of year)SubstrateFilter fiberstorage mats (Biodrain)Aluminium collection stripNote:Please be aware that roof greening adds a load of approx. 50 kg/m². The structure must have capacity to bear this weight. It may become necessary to mount the increased snow load. It is optionally available. Roof greening is separately supplied and can only be delivered in Germany.Roof greening system550 x 550 cmIncluding substrateincluding filter fiberIncludinig storage mats (Biodrain)
delivery time: 3-4 weeks
Roof greening not only looks good, it also provides many benefits. This roofing protects against the elements, reduces the noise of precipitation, and looks great in a natural environment.Make sure to water regularly during the growth phase (depending on environmental influences). The substrate must be kept sufficiently moist until the roots are established.Included in delivery:Sedum sprouts (mix of 3-4 types, which vary according to time of year)SubstrateFilter fiberstorage mats (Biodrain)Aluminium collection stripNote:Please be aware that roof greening adds a load of approx. 50 kg/m². The structure must have capacity to bear this weight. It may become necessary to mount the increased snow load. It is optionally available. Roof greening is separately supplied and can only be delivered in Germany.Roof greening system350 x 840 cmIncluding substrateincluding filter fiberIncludinig storage mats (Biodrain)
delivery time: 3-4 weeks
Would you like clear view of the sky?Then choose roofing with real glass!SKAN HOLZ roof glazing with laminated safety glass (LSG), in a thickness of 10 mm for terrace roofs, is supplied with aluminium profile, sealing rubber and mounting material. The glass panels are 105 cm wide and are split in the center. Roofing with real glass is optionally available in the series Andria, Ancona, Siena and Sanremo.Please notePlease be aware that there is a surcharge. The Polycarbonate sheets of terrace roofing are exchanged for the laminated safety glass. The glass is delivered separately and only within Germany.Surcharge for glass covering VSG10mm434 x 400 cmSupplied with aluminium profileInclusing sealing rubber
delivery time: 3-4 weeks
Storeroom of profiled siding material (for installation under a SKAN HOLZ carport)Profiled siding consists of loose tongued and grooved timber in 20 mm thickness, which is attached to one another and mounted between the posts.Product featuresWidth: 573 cmDepth: 317 cmHeight: 200 cmdoor (door clear opening 94 x 190 cm)Thickness: 20 mmpost including H-post anchorposts marked with red are available for carportsCustomer can easily adapt when installing into a carport with narrow passage widthMaterial: sprucecolour-treated in slate greyConstructionThe construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Storeroom C6573 x 317 cmProfiled siding materialColour-treated in slate grey
delivery time: 4-5 weeks