Friesland carport 402 x 708 cm, with steel roof panels, green impregnated

€3,045.00*

Color
Size
Material roof covering
Product number: 350414-99-40
Premium quality for your garden
*Manufacturer's recommended retail price. Delivery in Germany free kerbside / Austria free DIY store. Please note that an order can only be placed via our dealers.   Assembly instructions Data sheet

SKAN HOLZ caravan carport Friesland


  • Flat-roof carport

  • Exterior dimensions 402 x 708 cm

  • Entry height 350cm

  • Structure of impregnated softwood

  • Green impregnated

  • Posts 11.5 x 11.5 cm incl. H-post anchors

  • Roof covering made of trapezoidal steel sheet, galvanised and anthracite polyester-coated

  • Roof edging of wood-moulded facing with aluminium end edge


Construction


The construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.


Color treatment


Water-based impregnation protects the wooden components of this building kit from fungus and insect infestations. The building kit can be assembled immediately upon delivery. The wooden surface should be further treated no sooner than 2-3 sunny months later, after the excess impregnation has dried. Lightly sand and clean the surface prior to coating. Apply two coats of premium wood varnish to the surface. Look for good UV protection of the products and follow the guidelines of the varnish manufacturer. Calculate service intervals of about 4-5 years, prior to the appearance of visible damage. Follow the processing guidelines of the varnish manufacturer.


Steel roof cladding


The roof covering is made of galvanised trapezoidal steel sheet. The polyester coating on both sides, the upper side in elegant anthracite and the underside in light grey, not only ensures a modern appearance, but also effectively protects the material from the effects of the weather.


Thanks to its low thermal expansion, the trapezoidal steel sheet is particularly stable and minimises the risk of deformation, even in the event of extreme temperature fluctuations. The robust design guarantees very high resistance to hail and snow.


Bracing


The building kit includes 60 cm-long H-post anchors of galvanized flat steel for embedding in concrete in the site-built deep foundation (for size and lay-out see assembly instructions). They firmly connect the posts to the subsurface to ensure high stability.


  • Flat-roof carport

  • Structure of impregnated softwood

  • Green impregnated

  • Steel roof panels

  • Posts 11.5 x 11.5 cm

Material: Softwood
Color: Green
Color treatment: impregnated
Size: 402 x 708 cm
Basic width: 382 cm
Basic length: 469 cm
Total width: 402 cm
Total length: 708 cm
Roof ridge height: 369 cm
Roof eave height: 355 cm
Total height (front): 369 cm
Total height (behind): 355 cm
Roof shape: Flat roof
Material roof covering: Galvanised and coated trapezoidal sheet steel
Color roofing: Anthracite
Roof thickness: 0,5 mm
Roof surface: 28.12 m²
Roof edging: Wooden panel with roof edge profile
Roof slope: backwards
Slope: 1.2 °
Roof overhang (front): 71 cm
Roof overhang (behind): 15 cm
roof overhang (left): 10 cm
roof overhang (right): 10 cm
Base surface: 28.46 m²
Building volume: 103.03 m³
Passage width: 359 cm
Passage height (front): 349 cm
Passage height (behind): 335 cm
Thickness of posts: 11,5 x 11,5 cm
Post length: 220 cm
Post spacing (width): 359 cm
Post spacing (depth): 141 cm
Number of posts: 10 Stück
Anchoring: Post anchors
Snow load: 1.25 kN/m²
Wind pressure: 0.95 kN/m²
Type of installation: Free standing
Mounting material: Included
delivery time: 4 Wochen
Number of packages: 1
package weight 1: 709 kg
packaging width 1: 400 cm
packaging height 1: 45 cm
packaging length 1: 120 cm
Total weight: 709 kg
Included in delivery: H-post anchors, mounting material, assembly instructions
Not inclusiv: Cement
Garantie: 5 years according to our warranty conditions
delivery Note: Road that must support a 38t truck (Germany, mainland)

Accessories

Guttering set 434cm, anthrazit, steel
Weather-resistant metal gutter set.Length: 434 cmColour: anthracite coateddiameter gutter 100 mmdiameter downpipe 75 mmconsisting of :gutter(s)downpipeconnection elementsgutter end piecespipe clampsgutter bracketsdownpipe bendscrews for gutter bracketssilicone cartridge for sealingEasy insertion and clamping of parts, one-time gluing of gutter end pieces, no soldering nor welding.Metal gutter setAnthraciteDiameter gutter 100 mmDiameter downpipe 75 mm

€309.00*
Surcharge for the anti-condensation fleece for trapezoidal sheet roof panels, dimensions: 402 x 708 cm
Surcharge for the anti-condensation fleece for trapezoidal sheet roof panels, suitable for:SKAN HOLZ Friesland carport 402 x 708 cm Attention!Please note that this is a surcharge. The trapezoidal sheets included in the corresponding carport kit are replaced with trapezoidal sheets with anti-condensation fleece. This item can therefore only be ordered together with the corresponding carport.Steel roof covering with anti-condensation coatingThe roof cladding is made of galvanised trapezoidal sheet steel. The upper side is polyester-coated in elegant anthracite and not only ensures a modern appearance, but also effectively protects the material from the effects of the weather. The underside is primed and provided with anti-condensation fleece. The coating absorbs moisture from the underside of the metal, preventing it from dripping and also reducing the noise generated by rain and hail.Thanks to its low thermal expansion, the trapezoidal steel sheet is particularly stable and minimises the risk of deformation, even in the event of extreme temperature fluctuations. The robust design guarantees very high resistance to harsh weather conditions.Anti-condensation fleeceSuitable for Friesland carport 402 x 708 cmPrevents water from drippingReduces the noise level in rain and hailTop side is polyester-coated in anthracite

Content: 32.027 Quadratmeter (€5.34* / 1 Quadratmeter)

€171.00*
Rear wall profiled formwork 363 x 330 cm, green impregnated
Rear wall made of profiled boarding for installation under a SKAN HOLZ carportProfiled formwork consists of 20 mm thick profiled boards supplied loose, which are fitted together and mounted between the posts.Product featuresWidth: 363 cmHeight: 330 cmThickness: 20 mmIncluding posts 11.5 x 11.5 cmH-post anchor includedMaterial: SpruceGreen impregnatedConstructionThe construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.Color treatmentWater-based impregnation protects the wooden components of this building kit from fungus and insect infestations. The building kit can be assembled immediately upon delivery. The wooden surface should be further treated no sooner than 2-3 sunny months later, after the excess impregnation has dried. Lightly sand and clean the surface prior to coating. Apply two coats of premium wood varnish to the surface. Look for good UV protection of the products and follow the guidelines of the varnish manufacturer. Calculate service intervals of about 4-5 years, prior to the appearance of visible damage. Follow the processing guidelines of the varnish manufacturer.Rear wall made of profiled formworkFor installation in a Friesland carportGreen impregnatedHeight of 330 cmIncluding installation post and post anchor

€845.00*
Side wall profiled formwork 141 x 330 cm, green impregnated
Side wall made of profiled boarding for installation under a SKAN HOLZ carportProfiled formwork consists of 20 mm thick profiled boards supplied loose, which are fitted together and mounted between the posts.Product featuresWidth: 141 cmHeight: 330 cmThickness: 20 mmMaterial: SpruceGreen impregnatedConstructionThe construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.Color treatmentWater-based impregnation protects the wooden components of this building kit from fungus and insect infestations. The building kit can be assembled immediately upon delivery. The wooden surface should be further treated no sooner than 2-3 sunny months later, after the excess impregnation has dried. Lightly sand and clean the surface prior to coating. Apply two coats of premium wood varnish to the surface. Look for good UV protection of the products and follow the guidelines of the varnish manufacturer. Calculate service intervals of about 4-5 years, prior to the appearance of visible damage. Follow the processing guidelines of the varnish manufacturer.Side wall made of profiled formworkFor installation in a Friesland carportGreen impregnatedHeight of 330 cmFor a post spacing of 141 cm

€325.00*