Side wall made of profiled boarding for installation under a SKAN HOLZ carport
Profiled formwork consists of 20 mm thick profiled boards supplied loose, which are fitted together and mounted between the posts.
Product features
- Width: 141 cm
- Height: 330 cm
- Thickness: 20 mm
- Material: Spruce
- Green impregnated
Construction
The construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.
Color treatment
Water-based impregnation protects the wooden components of this building kit from fungus and insect infestations. The building kit can be assembled immediately upon delivery. The wooden surface should be further treated no sooner than 2-3 sunny months later, after the excess impregnation has dried. Lightly sand and clean the surface prior to coating. Apply two coats of premium wood varnish to the surface. Look for good UV protection of the products and follow the guidelines of the varnish manufacturer. Calculate service intervals of about 4-5 years, prior to the appearance of visible damage. Follow the processing guidelines of the varnish manufacturer.
- Side wall made of profiled formwork
- For installation in a Friesland carport
- Green impregnated
- Height of 330 cm
- For a post spacing of 141 cm