for canopies
Roof shingles for peaked roofs. These can be laid directly on the boarding or roofing felt and provide long-term protection against the elements. Please refer to the instructions of each product for the number of packages needed.Shingles, red2m² per packet
delivery time: 3-4 weeks
Content: 2 Quadratmeter (€29.50 / 1 Quadratmeter)
Roof shingles for peaked roofs. These can be laid directly on the boarding or roofing felt and provide long-term protection against the elements. Please refer to the instructions of each product for the number of packages needed.Shingles, black2m² per packet2 m²
delivery time: 3-4 weeks
Content: 2 Quadratmeter (€29.50 / 1 Quadratmeter)
Practical complete set for wall mounting SKAN HOLZ terrace roofs or canopies to 434 cm width. consisting of :400 mm threaded rod in 12 mm diametercapped nutswashersperforated sleeves in 20 mm diametertwo-component adhesive mortarIntended for uninsulated sand-lime brick, honeycomb-brick and concrete masonry. Computation of quantities based on spacing between individual mountings of 50 cm.Set for wall mountingSize 2consisting of 400 mm threaded rod in 12 mm diameterIncluding two-component adhesive mortar
delivery time: 2-3 weeks
Side wall made of slats for installation in a SKAN HOLZ canopyThe walls consist of loosely supplied slats, which are screwed together with battens.Product featuresWidth: 101 cmHeight: 217 cmThickness of the vertical slats: 4.0 x 4.0 cmThickness of the horizontal slats: 1.6 x 4.0 cmMaterial: Nordic spruceUntreated in colourPhoto galleryAny products shown for which the side panel is intended, colour treatment and decoration are not included in the scope of delivery. These are customer photos to give you an impression of the installed state.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThis kit is supplied untreated in color. This gives you the option to paint the surfaces according to your own design preferences and to match them to their surroundings.As timber used outdoors is exposed to the elements, a suitable protective coat is recommended. To ensure the treatment is as even as possible, the first coat should be applied to all sides of the timber components before assembly. Suitable wood protection products may be used for this purpose in accordance with the manufacturer’s instructions.To preserve the appearance of the wood in the long term, regular care and maintenance are advisable. The required maintenance intervals depend, amongst other things, on the location, weather conditions and the chosen coating. Please follow the relevant application and care instructions provided by the manufacturers of the products used.Side wall made of slatsWind and privacy protectionNordic spruceUntreated in colourFastening material included
delivery time: 3-4 weeks
Practical complete set for wall mounting SKAN HOLZ terrace roofs or canopies to 541 cm width. consisting of :400 mm threaded rod in 12 mm diametercapped nutswashersperforated sleeves in 20 mm diametertwo-component adhesive mortarIntended for uninsulated sand-lime brick, honeycomb-brick and concrete masonry. Computation of quantities based on spacing between individual mountings of 50 cm.Set for wall mountingSize 3consisting of 400 mm threaded rod in 12 mm diameterIncluding two-component adhesive mortar
delivery time: 2-3 weeks
Side wall made of slats for installation in a SKAN HOLZ canopyThe walls consist of loosely supplied slats, which are screwed together with battens.Product featuresWidth: 113 cmHeight: 217 cmThickness of the slats: 4.0 x 4.0 cmThickness of the slats: 1.6 x 4.0 cmMaterial: Nordic spruceUntreated in colourPhoto galleryAny products shown for which the side panel is intended, colour treatment and decoration are not included in the scope of delivery. These are customer photos to give you an impression of the installed state.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThis kit is supplied untreated in color. This gives you the option to paint the surfaces according to your own design preferences and to match them to their surroundings.As timber used outdoors is exposed to the elements, a suitable protective coat is recommended. To ensure the treatment is as even as possible, the first coat should be applied to all sides of the timber components before assembly. Suitable wood protection products may be used for this purpose in accordance with the manufacturer’s instructions.To preserve the appearance of the wood in the long term, regular care and maintenance are advisable. The required maintenance intervals depend, amongst other things, on the location, weather conditions and the chosen coating. Please follow the relevant application and care instructions provided by the manufacturers of the products used.Side wall made of slatsWind and privacy protectionNordic spruceUntreated in colourFastening material included
delivery time: 3-4 weeks
Side wall made of slats for installation in a SKAN HOLZ canopyThe walls consist of loosely supplied slats, which are screwed together with battens.Product featuresWidth: 101 cmHeight: 217 cmThickness of the slats: 4.0 x 4.0 cmThickness of the slats: 1.6 x 4.0 cmMaterial: Nordic spruceColour-treated in walnutPhoto galleryAny products shown for which the side panel is intended, colour treatment and decoration are not included in the scope of delivery. These are customer photos to give you an impression of the installed state.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Side wall made of slatsWind and privacy protectionNordic spruceColour-treated in walnutFastening material included
delivery time: 4-5 weeks
Practical complete set for wall mounting SKAN HOLZ terrace roofs or canopies to 648 cm width. consisting of :400 mm threaded rod in 12 mm diametercapped nutswashersperforated sleeves in 20 mm diametertwo-component adhesive mortarIntended for uninsulated sand-lime brick, honeycomb-brick and concrete masonry. Computation of quantities based on spacing between individual mountings of 50 cm.Set for wall mountingSize 4consisting of 400 mm threaded rod in 12 mm diameterIncluding two-component adhesive mortar
delivery time: 2-3 weeks
Side wall made of slats for installation in a SKAN HOLZ canopyThe walls consist of loosely supplied slats, which are screwed together with battens.Product featuresWidth: 101 cmHeight: 217 cmThickness of the slats: 4.0 x 4.0 cmThickness of the slats: 1.6 x 4.0 cmMaterial: Nordic spruceColour-treated in light oakPhoto galleryAny products shown for which the side panel is intended, colour treatment and decoration are not included in the scope of delivery. These are customer photos to give you an impression of the installed state.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Side wall made of slatsWind and privacy protectionNordic spruceColour-treated in light oakFastening material included
delivery time: 4-5 weeks
Side wall made of slats for installation in a SKAN HOLZ canopyThe walls consist of loosely supplied slats, which are screwed together with battens.Product featuresWidth: 101 cmHeight: 217 cmThickness of the slats: 4.0 x 4.0 cmThickness of the slats: 1.6 x 4.0 cmMaterial: Nordic spruceColour-treated in anthracitePhoto galleryAny products shown for which the side panel is intended, colour treatment and decoration are not included in the scope of delivery. These are customer photos to give you an impression of the installed state.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Side wall made of slatsWind and privacy protectionNordic spruceColour-treated in anthraciteFastening material included
delivery time: 4-5 weeks
Side wall made of slats for installation in a SKAN HOLZ canopyThe walls consist of loosely supplied slats, which are screwed together with battens.Product featuresWidth: 101 cmHeight: 217 cmThickness of the slats: 4.0 x 4.0 cmThickness of the slats: 1.6 x 4.0 cmMaterial: Nordic spruceColour-treated in whitePhoto galleryAny products shown for which the side panel is intended, colour treatment and decoration are not included in the scope of delivery. These are customer photos to give you an impression of the installed state.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Side wall made of slatsWind and privacy protectionNordic spruceColour-treated in whiteFastening material included
delivery time: 4-5 weeks
Side wall made of slats for installation in a SKAN HOLZ canopyThe walls consist of loosely supplied slats, which are screwed together with battens.Product featuresWidth: 101 cmHeight: 217 cmThickness of the slats: 4.0 x 4.0 cmThickness of the slats: 1.6 x 4.0 cmMaterial: Nordic spruceColour-treated in slate greyPhoto galleryAny products shown for which the side panel is intended, colour treatment and decoration are not included in the scope of delivery. These are customer photos to give you an impression of the installed state.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Side wall made of slatsWind and privacy protectionNordic spruceColour-treated in slate greyFastening material included
delivery time: 4-5 weeks
Side wall made of slats for installation in a SKAN HOLZ canopyThe walls consist of loosely supplied slats, which are screwed together with battens.Product featuresWidth: 113 cmHeight: 217 cmThickness of the slats: 4.0 x 4.0 cmThickness of the slats: 1.6 x 4.0 cmMaterial: Nordic spruceColour-treated in walnutPhoto galleryAny products shown for which the side panel is intended, colour treatment and decoration are not included in the scope of delivery. These are customer photos to give you an impression of the installed state.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Side wall made of slatsWind and privacy protectionNordic spruceColour-treated in walnutFastening material included
delivery time: 4-5 weeks
Side wall made of slats for installation in a SKAN HOLZ canopyThe walls consist of loosely supplied slats, which are screwed together with battens.Product featuresWidth: 113 cmHeight: 217 cmThickness of the slats: 4.0 x 4.0 cmThickness of the slats: 1.6 x 4.0 cmMaterial: Nordic spruceColour-treated in light oakPhoto galleryAny products shown for which the side panel is intended, colour treatment and decoration are not included in the scope of delivery. These are customer photos to give you an impression of the installed state.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Side wall made of slatsWind and privacy protectionNordic spruceColour-treated in light oakFastening material included
delivery time: 4-5 weeks
Side wall made of slats for installation in a SKAN HOLZ canopyThe walls consist of loosely supplied slats, which are screwed together with battens.Product featuresWidth: 113 cmHeight: 217 cmThickness of the slats: 4.0 x 4.0 cmThickness of the slats: 1.6 x 4.0 cmMaterial: Nordic spruceColour-treated in anthracitePhoto galleryAny products shown for which the side panel is intended, colour treatment and decoration are not included in the scope of delivery. These are customer photos to give you an impression of the installed state.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Side wall made of slatsWind and privacy protectionNordic spruceColour-treated in anthraciteFastening material included
delivery time: 4-5 weeks
Side wall made of slats for installation in a SKAN HOLZ canopyThe walls consist of loosely supplied slats, which are screwed together with battens.Product featuresWidth: 113 cmHeight: 217 cmThickness of the slats: 4.0 x 4.0 cmThickness of the slats: 1.6 x 4.0 cmMaterial: Nordic spruceColour-treated in slate greyPhoto galleryAny products shown for which the side panel is intended, colour treatment and decoration are not included in the scope of delivery. These are customer photos to give you an impression of the installed state.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Side wall made of slatsWind and privacy protectionNordic spruceColour-treated in slate greyFastening material included
delivery time: 4-5 weeks
Side wall made of slats for installation in a SKAN HOLZ canopyThe walls consist of loosely supplied slats, which are screwed together with battens.Product featuresWidth: 113 cmHeight: 217 cmThickness of the slats: 4.0 x 4.0 cmThickness of the slats: 1.6 x 4.0 cmMaterial: Nordic spruceColour-treated in whitePhoto galleryAny products shown for which the side panel is intended, colour treatment and decoration are not included in the scope of delivery. These are customer photos to give you an impression of the installed state.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Side wall made of slatsWind and privacy protectionNordic spruceColour-treated in whiteFastening material included
delivery time: 4-5 weeks