Home
The SKAN HOLZ snow load extension consists of additional rafters that you mount between the existing roof rafters. This reduces the rafter spacing of the carport and increases the overall load-bearing capacity. The number and size of the rafters varies depending on the carport.The snow load increase raises the snow load of the carport to 2.0 kN/m².This snow load increase contains 6 additional rafters and is suitable for the following models:Emsland carport 609 (613) x 846 cmWendland carport 630 x 879 cmSpessart carport 611 x 846 cmColour-treated in whitePlease note:The snow load cannot be retrofitted to the carports. Please check the snow load limit required in your residential area before assembly.ConstructionThe construction is made of glued laminate timber, consisting of several dried layers, attached to one another with finger-jointing. They are glued onto one another for weather-resistance. This results in a load-bearing beam which is more resistant to warping and less prone to fissures than naturally grown wood.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Snow load increase to sk=2.00 kN/m²Glued laminated timber, Colour-treated in whiteSuitable for Emsland carport 609 (613) x 846 cmSuitable for Wendland carport 630 x 879 cmSuitable for carport Spessart 611 x 846 cm
delivery time: 4-5 weeks
The SKAN HOLZ snow load extension consists of additional rafters that you mount between the existing roof rafters. This reduces the rafter spacing of the carport and increases the overall load-bearing capacity. The number and size of the rafters varies depending on the carport.The snow load increase raises the snow load of the carport to 2.0 kN/m².This snow load increase contains 6 additional rafters and is suitable for the following models:Emsland carport 609 (613) x 846 cmWendland carport 630 x 879 cmSpessart carport 611 x 846 cmColour-treated in anthracitePlease note:The snow load cannot be retrofitted to the carports. Please check the snow load limit required in your residential area before assembly.ConstructionThe construction is made of glued laminate timber, consisting of several dried layers, attached to one another with finger-jointing. They are glued onto one another for weather-resistance. This results in a load-bearing beam which is more resistant to warping and less prone to fissures than naturally grown wood.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Snow load increase to sk=2.00 kN/m²Glued laminated timber, colour-treated in anthraciteSuitable for Emsland carport 609 (613) x 846 cmSuitable for Wendland carport 630 x 879 cmSuitable for carport Spessart 611 x 846 cm
delivery time: 4-5 weeks
The SKAN HOLZ snow load extension consists of additional rafters that you mount between the existing roof rafters. This reduces the rafter spacing of the carport and increases the overall load-bearing capacity. The number and size of the rafters varies depending on the carport.The snow load increase raises the snow load of the carport to 2.0 kN/m².This snow load increase contains 6 additional rafters and is suitable for the following models:Emsland carport 609 (613) x 846 cmWendland carport 630 x 879 cmSpessart carport 611 x 846 cmColour-treated in slate greyPlease note:The snow load cannot be retrofitted to the carports. Please check the snow load limit required in your residential area before assembly.ConstructionThe construction is made of glued laminate timber, consisting of several dried layers, attached to one another with finger-jointing. They are glued onto one another for weather-resistance. This results in a load-bearing beam which is more resistant to warping and less prone to fissures than naturally grown wood.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Snow load increase to sk=2.00 kN/m²Glued laminated timber, colour-treated in slate greySuitable for Emsland carport 609 (613) x 846 cmSuitable for Wendland carport 630 x 879 cmSuitable for carport Spessart 611 x 846 cm
delivery time: 4-5 weeks
SKAN HOLZ Canopy extension to a depth of 212 cmProduct featuresSuitable for SKAN HOLZ Toronto log cabins (basic models)Width: 420 cmSturdy structure thanks to wall logs in the gable triangle and moulded corner connectionsMaterial: Nordic spruceUntreated in color2 posts 12 x 12 cm28 mm roof boarding1 layer of roofing felt for initial coveringToronto Canopy Extension420 cm widefor Toronto base houses70 and over
delivery time: 5-6 weeks
SKAN HOLZ Canopy extension to a depth of 212 cmProduct featuresSuitable for SKAN HOLZ log cabins, Bern model (Roof can be insulated (for roof shingles))Width: 420 cmSturdy structure thanks to wall planks in the gable triangle and moulded corner connectionsMaterial: Nordic spruceUntreated in color2 posts 12 x 12 cm19 mm roof boarding with counter-battens and a second layer of roof boarding1 layer of roofing felt for initial coveringCanopy extension in Bern420 cm wideRoof can be insulated (for roof shingles) in Bern45 and over
delivery time: 5-6 weeks
Roof greening not only looks good, it also provides many benefits. This roofing protects against the elements, reduces the noise of precipitation, and looks great in a natural environment.Make sure to water regularly during the growth phase (depending on environmental influences). The substrate must be kept sufficiently moist until the roots are established.Included in delivery:Sedum sprouts (mix of 3-4 types, which vary according to time of year)SubstrateFilter fiberstorage mats (Biodrain)Aluminium collection stripNote:Please be aware that roof greening adds a load of approx. 50 kg/m². The structure must have capacity to bear this weight. It may become necessary to mount the increased snow load. It is optionally available. Roof greening is separately supplied and can only be delivered in Germany.Roof greening system390 x 860 cmIncluding substrateincluding filter fiberIncludinig storage mats (Biodrain)
delivery time: 3-4 weeks
Would you like clear view of the sky?Then choose roofing with real glass!SKAN HOLZ roof glazing with laminated safety glass (LSG), in a thickness of 10 mm for terrace roofs, is supplied with aluminium profile, sealing rubber and mounting material. The glass panels are 105 cm wide and are split in the center. Roofing with real glass is optionally available in the series Andria, Ancona, Siena and Sanremo.Please notePlease be aware that there is a surcharge. The Polycarbonate sheets of terrace roofing are exchanged for the laminated safety glass. The glass is delivered separately and only within Germany.Surcharge for glass covering VSG10mm541 x 350 cmSupplied with aluminium profileInclusing sealing rubber
delivery time: 3-4 weeks
Would you like clear view of the sky?Then choose roofing with real glass!SKAN HOLZ roof glazing with laminated safety glass (LSG), in a thickness of 10 mm for terrace roofs, is supplied with aluminium profile, sealing rubber and mounting material. The glass panels are 105 cm wide and are split in the center. Roofing with real glass is optionally available in the series Andria, Ancona, Siena and Sanremo.Please notePlease be aware that there is a surcharge. The Polycarbonate sheets of terrace roofing are exchanged for the laminated safety glass. The glass is delivered separately and only within Germany.Surcharge for glass covering VSG10mm648 x 300 cmSupplied with aluminium profileInclusing sealing rubber
delivery time: 3-4 weeks
SKAN HOLZ canopy extension to a depth of 212 cmProduct featuresSuitable for SKAN HOLZ Toronto log cabins (Roof can be insulated (for roof tiles))Width: 420 cmSturdy structure thanks to wall planks in the gable triangle and moulded corner connectionsMaterial: Nordic spruceUntreated in color2 posts 12 x 12 cm19 mm roof boarding with counter-battens and roof battens1 layer of roofing felt for initial coveringToronto Canopy Extension420 cm wideRoof can be insulated (for roof tiles) in Toronto70 and over
delivery time: 5-6 weeks
Roof greening not only looks good, it also provides many benefits. This roofing protects against the elements, reduces the noise of precipitation, and looks great in a natural environment.Make sure to water regularly during the growth phase (depending on environmental influences). The substrate must be kept sufficiently moist until the roots are established.Included in delivery:Sedum sprouts (mix of 3-4 types, which vary according to time of year)SubstrateFilter fiberstorage mats (Biodrain)Aluminium collection stripNote:Please be aware that roof greening adds a load of approx. 50 kg/m². The structure must have capacity to bear this weight. It may become necessary to mount the increased snow load. It is optionally available. Roof greening is separately supplied and can only be delivered in Germany.Roof greening system400 x 840 cmIncluding substrateincluding filter fiberIncludinig storage mats (Biodrain)
delivery time: 3-4 weeks
RoofingThe roof is supplied with 20 mm-thick roof boarding of solid wood roofing with roof shingles.
Would you like clear view of the sky?Then choose roofing with real glass!SKAN HOLZ roof glazing with laminated safety glass (LSG), in a thickness of 10 mm for terrace roofs, is supplied with aluminium profile, sealing rubber and mounting material. The glass panels are 105 cm wide and are split in the center. Roofing with real glass is optionally available in the series Andria, Ancona, Siena and Sanremo.Please notePlease be aware that there is a surcharge. The Polycarbonate sheets of terrace roofing are exchanged for the laminated safety glass. The glass is delivered separately and only within Germany.Surcharge for glass covering VSG10mm541 x 400 cmSupplied with aluminium profileInclusing sealing rubber
delivery time: 3-4 weeks
Roof greening not only looks good, it also provides many benefits. This roofing protects against the elements, reduces the noise of precipitation, and looks great in a natural environment.Make sure to water regularly during the growth phase (depending on environmental influences). The substrate must be kept sufficiently moist until the roots are established.Included in delivery:Sedum sprouts (mix of 3-4 types, which vary according to time of year)SubstrateFilter fiberstorage mats (Biodrain)Aluminium collection stripNote:Please be aware that roof greening adds a load of approx. 50 kg/m². The structure must have capacity to bear this weight. It may become necessary to mount the increased snow load. It is optionally available. Roof greening is separately supplied and can only be delivered in Germany.Roof greening system609 x 600 cmIncluding substrateincluding filter fiberIncludinig storage mats (Biodrain)
delivery time: 3-4 weeks
