SKAN HOLZ Carport Eifel
- Wall-mounting carport
- Exterior dimensions 300 x 541 cm
- including entrance arch
- solid structure of high quality glued laminate (BSH spruce)
- colour-treated in slate grey
- posts 12 x 12 cm including H-post anchor
- Roofing 16 mm Polycarbonate sheet in clear
- Supplied without wall-attachment material
Construction
The construction is made of glued laminate timber, consisting of several dried layers, attached to one another with finger-jointing. They are glued onto one another for weather-resistance. This results in a load-bearing beam which is more resistant to warping and less prone to fissures than naturally grown wood.
Colour treatment
The colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.
Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.
For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.
Roof covering
The roof cladding consists of 16 mm thick polycarbonate multiwall sheets. The upper surface is coated with a UV-reflective layer. These are secured using aluminium profiles with EPDM lip seals.
Bracing
The building kit includes 60 cm-long H-post anchors of galvanized flat steel for embedding in concrete in the site-built deep foundation (for size and lay-out see assembly instructions). They firmly connect the posts to the subsurface to ensure high stability.
- Wall-mounting carport
- Solid structure of glued laminate (BSH spruce)
- Colour-treated in slate grey
- Roofing: Polycarbonate sheet in clear
- Posts 12 x 12 cm
