Home
The SKAN HOLZ increased snow-load consists of additional rafter triangles that you mount between the existing rafter triangles. In this way you reduce the rafter spacing of the carport and thereby increase the overall load capacity. The number and size of the rafters varies depending on the carport.Increased snow load increases the snow load of the carport to 1,9 kN/m².This increased snow load fits the following models:Carport Wallgau 620 x 900 cmcolour-treated in walnutPlease be aware:Increased snow load cannot subsequently be backfitted on the carports. Before assembling, please find out what the snow-load limit is in your area.ConstructionThe construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Snow load620 x 900 cmStructure of impregnated softwoodColour-treated in walnut
delivery time: 4-5 weeks
The decorative SKAN HOLZ sidewall with solid St. Andrew's crosses of solid structural timber is suited to SKAN HOLZ terrace roofs of glued laminate with a depth of 250cm and 239cm (wall mounting).Product featuresWidth: 205 cmHeight: 210 cm (+arbitrary distance form floor)thickness cross beams: 10 x 10 cmthickness St. Andrew`s cross: 8 x 8 cmthickness posts: 12 x 12 cmincluding mounting bracket(s)Material: sprucecolour-treated in walnutPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Sidewall (wall mounting)St.Andrew`s cross, nordic spruceSuitable for terrace roofs with a depth of 250 cmColour-treated in walnut
delivery time: 4-5 weeks
The decorative SKAN HOLZ balustrade with solid St. Andrew's crosses of solid structural timber is suited to SKAN HOLZ gazebos of glued laminate timber with post spacing of 465 cm.Product featuresWidth: 465 cmHeight: 84 cm (+arbitrary distance form floor)thickness cross beams: 10 x 10 cmthickness St. Andrew`s cross: 8 x 8 cmthickness posts: 12 x 12 cmincluding mounting bracketsincluding post cover capMaterial: sprucecolour-treated in walnutPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Balustrade St.Andrew`s crossSuitable for post spacing of 465 cmNordic spruceColour-treated in walnut
delivery time: 4-5 weeks
The SKAN HOLZ snow load extension consists of additional rafters that you mount between the existing roof rafters. This reduces the rafter spacing of the carport and increases the overall load-bearing capacity. The number and size of the rafters varies depending on the carport.The snow load increase raises the snow load of the carport to 2.0 kN/m².This snow load increase contains 8 additional rafters and fits the following models:Friesland carport 546 x 708 cmFriesland carport 557 x 708 cmColour-treated in walnutPlease note:The snow load cannot be retrofitted to the carports. Please check the snow load limit required in your residential area before assembly.ConstructionThe construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Snow load increase to sk=2.00 kN/m²Suitable for Friesland carport 546 x 708 cmSuitable for Friesland carport 557 x 708 cmColour-treated in walnutMust be installed during carport assembly
delivery time: 4-5 weeks
The decorative SKAN HOLZ sidewall with solid St. Andrew's crosses of solid structural timber is suited to SKAN HOLZ terrace roofs of glued laminate with a depth of 400cm and 389cm.Product featuresWidth: 343 cmHeight: 210 cm (+arbitrary distance form floor)thickness cross beams: 10 x 10 cmthickness St. Andrew`s cross: 8 x 8 cmthickness posts: 12 x 12 cmincluding mounting bracketsMaterial: sprucecolour-treated in light oakPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Balustrade St.Andrew`s cross, nordic spruceSuitable for free standing terrace roofsSuitable for a depth of 389 and 400 cmColour-treated in light oak
delivery time: 4-5 weeks
The decorative SKAN HOLZ sidewall with solid St. Andrew's crosses of solid structural timber is suited to SKAN HOLZ terrace roofs of glued laminate with a depth of 400cm and 389cm.Product featuresWidth: 343 cmHeight: 210 cm (+arbitrary distance form floor)thickness cross beams: 10 x 10 cmthickness St. Andrew`s cross: 8 x 8 cmthickness posts: 12 x 12 cmincluding mounting bracketsMaterial: sprucecolour-treated in walnutPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Balustrade St.Andrew`s cross, nordic spruceSuitable for free standing terrace roofsSuitable for a depth of 389 and 400 cmColour-treated in walnut
delivery time: 4-5 weeks
The SKAN HOLZ snow load extension consists of additional rafters that you mount between the existing roof rafters. This reduces the rafter spacing of the carport and increases the overall load-bearing capacity. The number and size of the rafters varies depending on the carport.The snow load increase raises the snow load of the carport to 2.0 kN/m².This snow load increase contains 8 additional rafters and is suitable for the following models:Spreewald carport 585 x 741 cmColour-treated in walnutPlease note:The snow load extension cannot be retrofitted to the carports. Please check the snow load limit required in your residential area before assembly.ConstructionThe construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Snow load increase to sk=2.00 kN/m²Suitable for Spreewald carport 585 x 741 cmColour-treated in walnutMust be installed during carport assembly
delivery time: 4-5 weeks
The SKAN HOLZ increased snow-load consists of additional rafter triangles that you mount between the existing rafter triangles. In this way you reduce the rafter spacing of the carport and thereby increase the overall load capacity. The number and size of the rafters varies depending on the carport.Increased snow load increases the snow load of the carport to 1,9 kN/m².This increased snow load fits the following models:Carport Wallgau 620 x 900 cmcolour-treated in slate greyPlease be aware:Increased snow load cannot subsequently be backfitted on the carports. Before assembling, please find out what the snow-load limit is in your area.ConstructionThe construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Snow load620 x 900 cmStructure of impregnated softwoodColour-treated in slate grey
delivery time: 4-5 weeks
Rear wall made of profiled boarding for installation under a SKAN HOLZ carportProfiled formwork consists of 20 mm thick profiled boards supplied loose, which are fitted together and mounted between the posts.Product featuresWidth: 363 cmHeight: 330 cmThickness: 20 mmIncluding posts 11.5 x 11.5 cmH-post anchor includedMaterial: SpruceColour-treated in walnutConstructionThe construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Rear wall made of profiled formworkFor installation in a Friesland carportColour-treated in walnutHeight of 330 cmIncluding installation post and post anchor
delivery time: 3-4 weeks
The SKAN HOLZ snow load extension consists of additional rafters that you mount between the existing roof rafters. This reduces the rafter spacing of the carport and increases the overall load-bearing capacity. The number and size of the rafters varies depending on the carport.The snow load increase raises the snow load of the carport to 2.0 kN/m².This snow load increase contains 8 additional rafters and fits the following models:Friesland carport 546 x 708 cmFriesland carport 557 x 708 cmColour-treated in slate greyPlease note:The snow load cannot be retrofitted to the carports. Please check the snow load limit required in your residential area before assembly.ConstructionThe construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Snow load increase to sk=2.00 kN/m²Suitable for Friesland carport 546 x 708 cmSuitable for Friesland carport 557 x 708 cmColour-treated in slate greyMust be installed during carport assembly
delivery time: 4-5 weeks
The SKAN HOLZ snow load extension consists of additional rafters that you mount between the existing roof rafters. This reduces the rafter spacing of the carport and increases the overall load-bearing capacity. The number and size of the rafters varies depending on the carport.The snow load increase raises the snow load of the carport to 2.0 kN/m².This snow load increase contains 8 additional rafters and fits the following models:Friesland carport 546 x 708 cmFriesland carport 557 x 708 cmColour-treated in anthracitePlease note:The snow load cannot be retrofitted to the carports. Please check the snow load limit required in your residential area before assembly.ConstructionThe construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Snow load increase to sk=2.00 kN/m²Suitable for Friesland carport 546 x 708 cmSuitable for Friesland carport 557 x 708 cmColour-treated in anthraciteMust be installed during carport assembly
delivery time: 4-5 weeks
Backwall of siding for installation in a SKAN HOLZ CarportSiding consists of loose boarding in 20 mm thickness, and is not installed until the carport has been completely erected. It provides for increased stability, privacy shield from the side, and protection from wind and overgrown hedges.Product featuresWidth: 550 cmHeight: 180 cmthickness siding: 2 x 12 cmincluding H-post anchorMaterial: nordic sprucenot colour-treatedPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThis kit is supplied untreated in color. This gives you the option to paint the surfaces according to your own design preferences and to match them to their surroundings.As timber used outdoors is exposed to the elements, a suitable protective coat is recommended. To ensure the treatment is as even as possible, the first coat should be applied to all sides of the timber components before assembly. Suitable wood protection products may be used for this purpose in accordance with the manufacturer’s instructions.To preserve the appearance of the wood in the long term, regular care and maintenance are advisable. The required maintenance intervals depend, amongst other things, on the location, weather conditions and the chosen coating. Please follow the relevant application and care instructions provided by the manufacturers of the products used.Backwall, nordic sprucePanels with vertical slatsSuitable for post spacing of 550 cmnot Colour-treated
delivery time: 3-4 weeks
The SKAN HOLZ snow load extension consists of additional rafters that you mount between the existing roof rafters. This reduces the rafter spacing of the carport and increases the overall load-bearing capacity. The number and size of the rafters varies depending on the carport.The snow load increase raises the snow load of the carport to 2.0 kN/m².This snow load increase contains 8 additional rafters and is suitable for the following models:Spreewald carport 585 x 741 cmColour-treated in slate greyPlease note:The snow load extension cannot be retrofitted to the carports. Please check the snow load limit required in your residential area before assembly.ConstructionThe construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Snow load increase to sk=2.00 kN/m²Suitable for Spreewald carport 585 x 741 cmColour-treated in slate greyMust be installed during carport assembly
delivery time: 4-5 weeks
Weather-resistant metal gutter set.suited to the gazebo Nice 3Colour: anthracite coateddiameter gutter 100 mmdiameter downpipe 75 mmconsisting of :gutter(s)downpipeconnection elementsgutter end piecespipe clampsgutter bracketsdownpipe bendscrews for gutter bracketssilicone cartridge for sealingEasy insertion and clamping of parts, one-time gluing of gutter end pieces, no soldering nor welding.Metal gutter setAnthraciteDiameter gutter 100 mmDiameter downpipe 75 mm
delivery time: 3-4 weeks
The decorative SKAN HOLZ sidewall with solid St. Andrew's crosses of solid structural timber is suited to SKAN HOLZ terrace roofs of glued laminate with a depth of 350cm and 339cm.Product featuresWidth: 293 cmHeight: 210 cm (+arbitrary distance form floor)thickness cross beams: 10 x 10 cmthickness St. Andrew`s cross: 8 x 8 cmthickness posts: 12 x 12 cmincluding mounting bracketsMaterial: sprucecolour-treated in walnutPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Balustrade St.Andrew`s cross, nordic spruceSuitable for free standing terrace roofsSuitable for a depth of 339 and 350 cmColour-treated in walnut
delivery time: 4-5 weeks
The decorative SKAN HOLZ sidewall with solid St. Andrew's crosses of solid structural timber is suited to SKAN HOLZ terrace roofs of glued laminate with a depth of 350cm and 339cm.Product featuresWidth: 293 cmHeight: 210 cm (+arbitrary distance form floor)thickness cross beams: 10 x 10 cmthickness St. Andrew`s cross: 8 x 8 cmthickness posts: 12 x 12 cmincluding mounting bracketsMaterial: sprucecolour-treated in light oakPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Balustrade St.Andrew`s cross, nordic spruceSuitable for free standing terrace roofsSuitable for a depth of 339 and 350 cmColour-treated in light oak
delivery time: 4-5 weeks
Weather-resistant metal gutter set.suited to the gazebo Nice 2Colour: anthracite coateddiameter gutter 100 mmdiameter downpipe 75 mmconsisting of :gutter(s)downpipeconnection elementsgutter end piecespipe clampsgutter bracketsdownpipe bendscrews for gutter bracketssilicone cartridge for sealingEasy insertion and clamping of parts, one-time gluing of gutter end pieces, no soldering nor welding.Metal gutter setAnthraciteDiameter gutter 100 mmDiameter downpipe 75 mm
delivery time: 3-4 weeks
Storeroom of profiled siding material (for installation under a SKAN HOLZ carport)Profiled siding consists of loose tongued and grooved timber in 20 mm thickness, which is attached to one another and mounted between the posts.Product featuresWidth: 314 cmDepth: 164 cmHeight: 200 cmdoor (door clear opening 94 x 190 cm)Thickness: 20 mmpost including H-post anchorposts marked with red are available for carportsCustomer can easily adapt when installing into a carport with narrow passage widthMaterial: spruceGreen impregnatedConstructionThe construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.Colour treatmentThe wooden parts in this kit have been treated at the factory with a water-based preservative. This means the kit can be assembled straight away upon delivery. To ensure the long-term preservation of the wooden surface, it is recommended that the wood be treated further after a sufficient drying and weathering period of approximately 2 to 3 sunny months.Before painting, the surface should be lightly sanded and cleaned. It is then recommended to apply two coats of a wood preservative suitable for outdoor use. Products with UV protection can help to reduce the visual ageing of the wood caused by weathering. Please follow the application instructions provided by the respective manufacturer.Regular maintenance and timely re-treatment help to keep the surface in good condition over the long term. The required maintenance intervals depend on the location, exposure to the elements and the coating system used.Storeroom C1314 x 164 cmProfiled siding materialGreen impregnated
delivery time: 3-4 weeks
The decorative SKAN HOLZ sidewall with solid St. Andrew's crosses of solid structural timber is suited to SKAN HOLZ terrace roofs of glued laminate with a depth of 250cm and 239cm (wall mounting).Product featuresWidth: 205 cmHeight: 210 cm (+arbitrary distance form floor)thickness cross beams: 10 x 10 cmthickness St. Andrew`s cross: 8 x 8 cmthickness posts: 12 x 12 cmincluding mounting bracket(s)Material: sprucecolour-treated in whitePhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Sidewall (wall mounting)St.Andrew`s cross, nordic spruceSuitable for terrace roofs with a depth of 250 cmColour-treated in white
delivery time: 4-5 weeks
The decorative SKAN HOLZ balustrade with solid St. Andrew's crosses of solid structural timber is suited to SKAN HOLZ gazebos of glued laminate timber with post spacing of 465 cm.Product featuresWidth: 465 cmHeight: 84 cm (+arbitrary distance form floor)thickness cross beams: 10 x 10 cmthickness St. Andrew`s cross: 8 x 8 cmthickness posts: 12 x 12 cmincluding mounting bracketsincluding post cover capMaterial: sprucecolour-treated in anthracitePhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Balustrade St.Andrew`s crossSuitable for post spacing of 465 cmNordic spruceColour-treated in anthracite
delivery time: 4-5 weeks
The decorative SKAN HOLZ balustrade with solid St. Andrew's crosses of solid structural timber is suited to SKAN HOLZ gazebos of glued laminate timber with post spacing of 465 cm.Product featuresWidth: 465 cmHeight: 84 cm (+arbitrary distance form floor)thickness cross beams: 10 x 10 cmthickness St. Andrew`s cross: 8 x 8 cmthickness posts: 12 x 12 cmincluding mounting bracketsincluding post cover capMaterial: sprucecolour-treated in slate greyPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Balustrade St.Andrew`s crossSuitable for post spacing of 465 cmNordic spruceColour-treated in slate grey
delivery time: 4-5 weeks
The decorative SKAN HOLZ balustrade with solid St. Andrew's crosses of solid structural timber is suited to SKAN HOLZ gazebos of glued laminate timber with post spacing of 465 cm.Product featuresWidth: 465 cmHeight: 84 cm (+arbitrary distance form floor)thickness cross beams: 10 x 10 cmthickness St. Andrew`s cross: 8 x 8 cmthickness posts: 12 x 12 cmincluding mounting bracketsincluding post cover capMaterial: sprucecolour-treated in whitePhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Balustrade St.Andrew`s crossSuitable for post spacing of 465 cmNordic spruceColour-treated in white
delivery time: 4-5 weeks