Home
Practical SKAN HOLZ attached shed fits 45plus and 70plus log cabins. Can be freely positioned left, right or in the back.The walls of the attached shed are made of Nordic spruce logs in 28 mm thickness.The roof of the attached shed consists of 16 mm-thick solid wood. This roof structure makes the roof very easy to assemble and provides very high stability. This attached shed is supplied with bitumen roofing felt.Built-on shed200 x 200 cm28 mm wall
delivery time: 3-4 weeks
The decorative SKAN HOLZ sidewall with solid St. Andrew's crosses of solid structural timber is suited to SKAN HOLZ terrace roofs of glued laminate with a depth of 350cm and 339cm (wall mounting).Product featuresWidth: 305 cmHeight: 210 cm (+arbitrary distance form floor)thickness cross beams: 10 x 10 cmthickness St. Andrew`s cross: 8 x 8 cmthickness posts: 12 x 12 cmincluding mounting bracket(s)Material: sprucecolour-treated in light oakPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Sidewall (wall mounting)St.Andrew`s cross, nordic spruceSuitable for terrace roofs with a depth of 350 cmColour-treated in light oak
delivery time: 4-5 weeks
The decorative SKAN HOLZ sidewall with solid St. Andrew's crosses of solid structural timber is suited to SKAN HOLZ terrace roofs of glued laminate with a depth of 350cm and 339cm (wall mounting).Product featuresWidth: 305 cmHeight: 210 cm (+arbitrary distance form floor)thickness cross beams: 10 x 10 cmthickness St. Andrew`s cross: 8 x 8 cmthickness posts: 12 x 12 cmincluding mounting bracket(s)Material: sprucecolour-treated in walnutPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Sidewall (wall mounting)St.Andrew`s cross, nordic spruceSuitable for terrace roofs with a depth of 350 cmColour-treated in walnut
delivery time: 4-5 weeks
The decorative SKAN HOLZ sidewall with solid St. Andrew's crosses of Douglas fir is suited to SKAN HOLZ terrace roofs of Douglas fir with a depth 350 cm.Product featuresWidth: 305 cmHeight: 210 cmthickness cross beams: 10 x 10 cmthickness St. Andrew`s cross: 8 x 8 cmthickness posts: 12 x 12 cmincluding mounting bracket(s)Material: douglas fircolour-treated in walnutPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of Douglas fir. The reddish heart wood of the Douglas fir contains resin and oils that are resistant against fungus and insect infestations. We use technically-dried Douglas fir which, depending on length, is partly weatherproofed by finger jointing. This type of wood features high surface hardness. Fissures, branches and twists reflect the natural materials used.If Douglas fir is not treated with varnish, a glossy grey-silver patina forms over time. It protects the built structure from environmental challenges, and you from time-consuming wood maintenance.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Sidewall St.Andrew`s crossSuitable for terrace roofs with a depth of 350 cmdouglas firColour-treated in walnut
delivery time: 4-5 weeks
The decorative SKAN HOLZ sidewall with solid St. Andrew's crosses of solid structural timber is suited to SKAN HOLZ terrace roofs of glued laminate with a depth of 400cm and 389cm (wall mounting).Product featuresWidth: 355 cmHeight: 210 cm (+arbitrary distance form floor)thickness cross beams: 10 x 10 cmthickness St. Andrew`s cross: 8 x 8 cmthickness posts: 12 x 12 cmincluding mounting bracket(s)Material: sprucecolour-treated in walnutPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Sidewall (wall mounting)St.Andrew`s cross, nordic spruceSuitable for terrace roofs with a depth of 400 cmColour-treated in walnut
delivery time: 4-5 weeks
The decorative SKAN HOLZ sidewall with solid St. Andrew's crosses of solid structural timber is suited to SKAN HOLZ terrace roofs of glued laminate with a depth of 400cm and 389cm (wall mounting).Product featuresWidth: 355 cmHeight: 210 cm (+arbitrary distance form floor)thickness cross beams: 10 x 10 cmthickness St. Andrew`s cross: 8 x 8 cmthickness posts: 12 x 12 cmincluding mounting bracket(s)Material: sprucecolour-treated in light oakPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Sidewall (wall mounting)St.Andrew`s cross, nordic spruceSuitable for terrace roofs with a depth of 400 cmColour-treated in light oak
delivery time: 4-5 weeks
Backwall of siding for installation in a SKAN HOLZ CarportSiding consists of loose boarding in 20 mm thickness, and is not installed until the carport has been completely erected. It provides for increased stability, privacy shield from the side, and protection from wind and overgrown hedges.Product featuresWidth: 550 cmHeight: 220 cmthickness siding: 2 x 12 cmincluding H-post anchorMaterial: nordic sprucecolour-treated in light oakPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Backwall, nordic sprucePanels with vertical slatsSuitable for post spacing of 550 cmColour-treated in light oak
delivery time: 4-5 weeks
Backwall of siding for installation in a SKAN HOLZ CarportSiding consists of loose boarding in 20 mm thickness, and is not installed until the carport has been completely erected. It provides for increased stability, privacy shield from the side, and protection from wind and overgrown hedges.Product featuresWidth: 550 cmHeight: 220 cmthickness siding: 2 x 12 cmincluding H-post anchorMaterial: nordic sprucecolour-treated in walnutPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Backwall, nordic sprucePanels with vertical slatsSuitable for post spacing of 550 cmColour-treated in walnut
delivery time: 4-5 weeks
Storeroom of profiled siding material (for installation under a SKAN HOLZ carport)Profiled siding consists of loose tongued and grooved timber in 20 mm thickness, which is attached to one another and mounted between the posts.Product featuresWidth: 378 cmDepth: 164 cmHeight: 200 cmdoor (door clear opening 94 x 190 cm)Thickness: 20 mmpost including H-post anchorposts marked with red are available for carportsCustomer can easily adapt when installing into a carport with narrow passage widthMaterial: sprucecolour-treated in slate greyConstructionThe construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Storeroom C3378 x 164 cmProfiled siding materialColour-treated in slate grey
delivery time: 4-5 weeks
The SKAN HOLZ snow load extension consists of additional rafters that you mount between the existing roof rafters. This reduces the rafter spacing of the carport and increases the overall load-bearing capacity. The number and size of the rafters varies depending on the carport.The snow load increase raises the snow load of the carport to 2.0 kN/m².This snow load extension contains 4 additional rafters and is suitable for the following models:Emsland carport 609 (613) x 604 cmWendland carport 630 x 637 cmSpessart carport 611 x 604 cmColour-treated in walnutPlease note:The snow load cannot be retrofitted to the carports. Please check the snow load limit required in your residential area before assembly.ConstructionThe construction is made of glued laminate timber, consisting of several dried layers, attached to one another with finger-jointing. They are glued onto one another for weather-resistance. This results in a load-bearing beam which is more resistant to warping and less prone to fissures than naturally grown wood.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Snow load increase to sk=2.00 kN/m²Glued laminated timber, colour-treated in walnutSuitable for Emsland carport 609 (613) x 604 cmSuitable for Wendland carport 630 x 637 cmSuitable for carport Spessart 611 x 604 cm
delivery time: 4-5 weeks
The SKAN HOLZ snow load extension consists of additional rafters that you mount between the existing roof rafters. This reduces the rafter spacing of the carport and increases the overall load-bearing capacity. The number and size of the rafters varies depending on the carport.The snow load increase raises the snow load of the carport to 2.0 kN/m².This snow load increase contains 4 additional rafters and is suitable for the following models:Emsland carport 609 (613) x 604 cmWendland carport 630 x 637 cmSpessart carport 611 x 604 cmColour-treated in light oakPlease note:The snow load cannot be retrofitted to the carports. Please check the snow load limit required in your residential area before assembly.ConstructionThe construction is made of glued laminate timber, consisting of several dried layers, attached to one another with finger-jointing. They are glued onto one another for weather-resistance. This results in a load-bearing beam which is more resistant to warping and less prone to fissures than naturally grown wood.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Snow load increase to sk=2.00 kN/m²Glued laminated timber, colour-treated in light oakSuitable for Emsland carport 609 (613) x 604 cmSuitable for Wendland carport 630 x 637 cmSuitable for carport Spessart 611 x 604 cm
delivery time: 4-5 weeks
The decorative SKAN HOLZ sidewall with solid St. Andrew's crosses of solid structural timber is suited to SKAN HOLZ terrace roofs of glued laminate with a depth of 350cm and 339cm (wall mounting).Product featuresWidth: 305 cmHeight: 210 cm (+arbitrary distance form floor)thickness cross beams: 10 x 10 cmthickness St. Andrew`s cross: 8 x 8 cmthickness posts: 12 x 12 cmincluding mounting bracket(s)Material: sprucecolour-treated in whitePhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Sidewall (wall mounting)St.Andrew`s cross, nordic spruceSuitable for terrace roofs with a depth of 350 cmColour-treated in white
delivery time: 4-5 weeks
The decorative SKAN HOLZ sidewall with solid St. Andrew's crosses of solid structural timber is suited to SKAN HOLZ terrace roofs of glued laminate with a depth of 350cm and 339cm (wall mounting).Product featuresWidth: 305 cmHeight: 210 cm (+arbitrary distance form floor)thickness cross beams: 10 x 10 cmthickness St. Andrew`s cross: 8 x 8 cmthickness posts: 12 x 12 cmincluding mounting bracket(s)Material: sprucecolour-treated in anthracitePhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Sidewall (wall mounting)St.Andrew`s cross, nordic spruceSuitable for terrace roofs with a depth of 350 cmColour-treated in anthracite
delivery time: 4-5 weeks
The decorative SKAN HOLZ sidewall with solid St. Andrew's crosses of solid structural timber is suited to SKAN HOLZ terrace roofs of glued laminate with a depth of 350cm and 339cm (wall mounting).Product featuresWidth: 305 cmHeight: 210 cm (+arbitrary distance form floor)thickness cross beams: 10 x 10 cmthickness St. Andrew`s cross: 8 x 8 cmthickness posts: 12 x 12 cmincluding mounting bracket(s)Material: sprucecolour-treated in slate greyPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Sidewall (wall mounting)St.Andrew`s cross, nordic spruceSuitable for terrace roofs with a depth of 350 cmColour-treated in slate grey
delivery time: 4-5 weeks
Storeroom of profiled siding material (for installation under a SKAN HOLZ carport)Profiled siding consists of loose tongued and grooved timber in 20 mm thickness, which is attached to one another and mounted between the posts.Product featuresWidth: 314 cmDepth: 317 cmHeight: 200 cmdoor (door clear opening 94 x 190 cm)Thickness: 20 mmpost including H-post anchorposts marked with red are available for carportsCustomer can easily adapt when installing into a carport with narrow passage widthMaterial: sprucecolour-treated in walnutConstructionThe construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Storeroom C2314 x 317 cmProfiled siding materialColour-treated in walnut
delivery time: 4-5 weeks
Storeroom of profiled siding material (for installation under a SKAN HOLZ carport)Profiled siding consists of loose tongued and grooved timber in 20 mm thickness, which is attached to one another and mounted between the posts.Product featuresWidth: 275 cmDepth: 164 cmHeight: 200 cmdoor (door clear opening 94 x 190 cm)Thickness: 20 mmpost including H-post anchorposts marked with red are available for carportsCustomer can easily adapt when installing into a carport with narrow passage widthMaterial: sprucecolour-treated in slate greyConstructionThe construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Storeroom C7275 x 164 cmProfiled siding materialColour-treated in slate grey
delivery time: 4-5 weeks
The decorative SKAN HOLZ sidewall with solid St. Andrew's crosses of solid structural timber is suited to SKAN HOLZ terrace roofs of glued laminate with a depth of 400cm and 389cm (wall mounting).Product featuresWidth: 355 cmHeight: 210 cm (+arbitrary distance form floor)thickness cross beams: 10 x 10 cmthickness St. Andrew`s cross: 8 x 8 cmthickness posts: 12 x 12 cmincluding mounting bracket(s)Material: sprucecolour-treated in anthracitePhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Sidewall (wall mounting)St.Andrew`s cross, nordic spruceSuitable for terrace roofs with a depth of 400 cmColour-treated in anthracite
delivery time: 4-5 weeks
The decorative SKAN HOLZ sidewall with solid St. Andrew's crosses of solid structural timber is suited to SKAN HOLZ terrace roofs of glued laminate with a depth of 400cm and 389cm (wall mounting).Product featuresWidth: 355 cmHeight: 210 cm (+arbitrary distance form floor)thickness cross beams: 10 x 10 cmthickness St. Andrew`s cross: 8 x 8 cmthickness posts: 12 x 12 cmincluding mounting bracket(s)Material: sprucecolour-treated in slate greyPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Sidewall (wall mounting)St.Andrew`s cross, nordic spruceSuitable for terrace roofs with a depth of 400 cmColour-treated in slate grey
delivery time: 4-5 weeks
The decorative SKAN HOLZ sidewall with solid St. Andrew's crosses of solid structural timber is suited to SKAN HOLZ terrace roofs of glued laminate with a depth of 400cm and 389cm (wall mounting).Product featuresWidth: 355 cmHeight: 210 cm (+arbitrary distance form floor)thickness cross beams: 10 x 10 cmthickness St. Andrew`s cross: 8 x 8 cmthickness posts: 12 x 12 cmincluding mounting bracket(s)Material: sprucecolour-treated in whitePhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Sidewall (wall mounting)St.Andrew`s cross, nordic spruceSuitable for terrace roofs with a depth of 400 cmColour-treated in white
delivery time: 4-5 weeks