Home

The SKAN HOLZ snow load extension consists of additional rafters that you mount between the existing roof rafters. This reduces the rafter spacing of the carport and increases the overall load-bearing capacity. The number and size of the rafters varies depending on the carport.The snow load increase raises the snow load of the carport to 2.0 kN/m².This snow load increase contains 10 additional rafters and fits the following models:Friesland carport 397 x 860 cmFriesland carport 402 x 860 cmColour-treated in slate greyPlease note:The snow load cannot be retrofitted to the carports. Please check the snow load limit required in your residential area before assembly.ConstructionThe construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Snow load increase to sk=2.00 kN/m²Suitable for Friesland carport 402 x 860 cmSuitable for Friesland carport 397 x 860 cmColour-treated in slate greyMust be installed during carport assembly

delivery time: 4-5 weeks

Carport double windowexterior frame dimensions: 132,4 x 82,1 cminterior frame dimensions: 2 * 57,5 x 70,5 cminstallation dimension: 129,4 x 82,5 cmwith turn/tilt functionreal glassMaterial: nordic sprucecolour-treated in anthraciteDouble window for CarportsExterior frame dimensions: 132.4 x 82.1 cmInterior frame dimensions: 2 x 57.5 x 70.5 cmColour-treated in anthracite

delivery time: 4-5 weeks

Carport double windowexterior frame dimensions: 132,4 x 82,1 cminterior frame dimensions: 2 * 57,5 x 70,5 cminstallation dimension: 129,4 x 82,5 cmwith turn/tilt functionreal glassMaterial: nordic sprucecolour-treated in slate greyDouble window for CarportsExterior frame dimensions: 132.4 x 82.1 cmInterior frame dimensions: 2 x 57.5 x 70.5 cmColour-treated in slate grey

delivery time: 4-5 weeks

Carport double windowexterior frame dimensions: 132,4 x 82,1 cminterior frame dimensions: 2 * 57,5 x 70,5 cminstallation dimension: 129,4 x 82,5 cmwith turn/tilt functionreal glassMaterial: nordic sprucecolour-treated in whiteDouble window for CarportsExterior frame dimensions: 132.4 x 82.1 cmInterior frame dimensions: 2 x 57.5 x 70.5 cmColour-treated in white

delivery time: 4-5 weeks

Practical awning set for SKAN HOLZ terrace roofs in sizes 648 x 400 cm, 648 x 357 cm and 648 x 389 cm.Product featuresComplete set of 6 awnings à 96 x 380 cmwater-repellent100% UV stable, textile polyester in whitemounting material consisting of suspension system with protective cap, barrel hook and stoppersAwning washable to 40°CAwnings should be taken in when storms threaten.Sun sailTextile polyester in white100% UV stableWater-repellent

delivery time: 2-3 weeks

The SKAN HOLZ snow load extension consists of additional rafters that you mount between the existing roof rafters. This reduces the rafter spacing of the carport and increases the overall load-bearing capacity. The number and size of the rafters varies depending on the carport.The snow load increase raises the snow load of the carport to 2.0 kN/m².This snow load increase contains 10 additional rafters and is suitable for the following models:Friesland carport 402 x 860 cmColour-treated in anthracitePlease note:The snow load extension cannot be retrofitted to the carports. Please check the snow load limit required in your residential area before assembly.ConstructionThe construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Snow load increase to sk=2.00 kN/m²Suitable for Friesland carport 402 x 860 cmColour-treated in anthraciteMust be installed during carport assembly

delivery time: 4-5 weeks

The decorative SKAN HOLZ balustrade of balcony siding is suited to SKAN HOLZ terrace roofs of glued laminate with post spacing of 400 cm.Product featuresWidth: 400 cmHeight: 96 cmthickness cross-bar: 6 x 6 cmthickness balcony board: 1,9 x 12 cmMaterial: nordic sprucecolour-treated in slate greyPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Balustrade balcony sidingSuitable for post spacing of 400 cmNordic spruceColour-treated in slate grey

delivery time: 4-5 weeks

The decorative SKAN HOLZ balustrade of balcony siding is suited to SKAN HOLZ terrace roofs of glued laminate with post spacing of 400 cm.Product featuresWidth: 400 cmHeight: 96 cmthickness cross-bar: 6 x 6 cmthickness balcony board: 1,9 x 12 cmMaterial: nordic sprucecolour-treated in anthracitePhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Balustrade balcony sidingSuitable for post spacing of 400 cmNordic spruceColour-treated in anthracite

delivery time: 4-5 weeks

The decorative SKAN HOLZ balustrade of balcony siding is suited to SKAN HOLZ terrace roofs of glued laminate with post spacing of 400 cm.Product featuresWidth: 400 cmHeight: 96 cmthickness cross-bar: 6 x 6 cmthickness balcony board: 1,9 x 12 cmMaterial: nordic sprucecolour-treated in whitePhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Balustrade balcony sidingSuitable for post spacing of 400 cmNordic spruceColour-treated in white

delivery time: 4-5 weeks

The decorative SKAN HOLZ sidewall with solid St. Andrew's crosses of solid structural timber is suited to SKAN HOLZ terrace roofs of glued laminate with a depth of 250cm and 239cm.Product featuresWidth: 193 cmHeight: 210 cm (+arbitrary distance form floor)thickness cross beams: 10 x 10 cmthickness St. Andrew`s cross: 8 x 8 cmthickness posts: 12 x 12 cmincluding mounting bracketsMaterial: sprucecolour-treated in walnutPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Balustrade St.Andrew`s cross, nordic spruceSuitable for free standing terrace roofsSuitable for a depth of 239 and 250 cmColour-treated in walnut

delivery time: 4-5 weeks

The decorative SKAN HOLZ sidewall with solid St. Andrew's crosses of solid structural timber is suited to SKAN HOLZ terrace roofs of glued laminate with a depth of 250cm and 239cm.Product featuresWidth: 193 cmHeight: 210 cm (+arbitrary distance form floor)thickness cross beams: 10 x 10 cmthickness St. Andrew`s cross: 8 x 8 cmthickness posts: 12 x 12 cmincluding mounting bracketsMaterial: sprucecolour-treated in light oakPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Balustrade St.Andrew`s cross, nordic spruceSuitable for free standing terrace roofsSuitable for a depth of 239 and 250 cmColour-treated in light oak

delivery time: 4-5 weeks

The practical SKAN HOLZ sidewall of solid structural timber with 10 mm-thick Polycarbonate sheet is suited to free-standing SKAN HOLZ terrace roofs of glued laminate with a depth of 350cm and 339cm.Product featuresWidth: 293 cmHeight: 200 cm (including distance form floor)thickness cross-bar: 6 x 6 cmthickness Polycarbonate sheet: 10 mmAluminium profile including EPDM lip-sealsMaterial: sprucecolour-treated in anthracitePhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Sidewall with polycarbonate sheetSuitable for free standing terrace roofsSuitable for a depth of 339 and 350 cmColour-treated in anthracite

delivery time: 4-5 weeks

The practical SKAN HOLZ sidewall of solid structural timber with 10 mm-thick Polycarbonate sheet is suited to free-standing SKAN HOLZ terrace roofs of glued laminate with a depth of 350cm and 339cm.Product featuresWidth: 293 cmHeight: 200 cm (including distance form floor)thickness cross-bar: 6 x 6 cmthickness Polycarbonate sheet: 10 mmAluminium profile including EPDM lip-sealsMaterial: sprucecolour-treated in slate greyPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Sidewall with polycarbonate sheetSuitable for free standing terrace roofsSuitable for a depth of 339 and 350 cmColour-treated in slate grey

delivery time: 4-5 weeks

The practical SKAN HOLZ sidewall of solid structural timber with 10 mm-thick Polycarbonate sheet is suited to free-standing SKAN HOLZ terrace roofs of glued laminate with a depth of 350cm and 339cm.Product featuresWidth: 293 cmHeight: 200 cm (including distance form floor)thickness cross-bar: 6 x 6 cmthickness Polycarbonate sheet: 10 mmAluminium profile including EPDM lip-sealsMaterial: sprucecolour-treated in whitePhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Sidewall with polycarbonate sheetSuitable for free standing terrace roofsSuitable for a depth of 339 and 350 cmColour-treated in white

delivery time: 4-5 weeks

The practical SKAN HOLZ sidewall of tongue and groove timber is suited to the SKAN HOLZ gazebo Toulouse.Product featureslight-band of Polycarbonate sheet in clearWidth: 270 cmHeight: 209 cmthickness posts: 12 x 12 cmthickness tongue and groove timber: 1,9 x 11,7 cmincluding mounting bracketsMaterial: nordic sprucecolour-treated in walnutConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Wall with strip light for gazebo Toulouse270 x 209 cmNordic spruceColour-treated in walnut

delivery time: 4-5 weeks

The SKAN HOLZ snow load extension consists of additional rafters that you mount between the existing roof rafters. This reduces the rafter spacing of the carport and increases the overall load-bearing capacity. The number and size of the rafters varies depending on the carport.The snow load increase raises the snow load of the carport to 2.0 kN/m².This snow load increase contains 6 additional rafters and is suitable for the following models:Emsland carport 340 (354) x 846 cmWendland carport 362 x 870 cmSpessart carport 355 x 846 cmColour-treated in light oakPlease note:The snow load cannot be retrofitted to the carports. Please check the snow load limit required in your residential area before assembly.ConstructionThe construction is made of glued laminate timber, consisting of several dried layers, attached to one another with finger-jointing. They are glued onto one another for weather-resistance. This results in a load-bearing beam which is more resistant to warping and less prone to fissures than naturally grown wood.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Snow load increase to sk=2.00 kN/m²Glued laminated timber, colour-treated in light oakSuitable for Emsland carport 340 (354) x 846 cmSuitable for Wendland carport 362 x 870 cmSuitable for carport Spessart 355 x 846 cm

delivery time: 4-5 weeks

Rear wall made of siding for installation in a SKAN HOLZ carportSiding consists of two layers of loose 20 mm thick formwork boards, which are only attached once the carport is completely assembled. It provides increased stability, privacy from the side and protection from e.g. wind or overgrown hedges.Product featuresWidth: 352 cmHeight: 180 cmFormwork thickness: 2 x 12 cmH-post anchor includedMaterial: Nordic spruceUntreated in colourPhoto galleryAny carports, colour treatment and decoration shown are not included in the scope of delivery. These are customer photos, which are intended to give you an impression of the installed state.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThis kit is supplied untreated in color. This gives you the option to paint the surfaces according to your own design preferences and to match them to their surroundings.As timber used outdoors is exposed to the elements, a suitable protective coat is recommended. To ensure the treatment is as even as possible, the first coat should be applied to all sides of the timber components before assembly. Suitable wood protection products may be used for this purpose in accordance with the manufacturer’s instructions.To preserve the appearance of the wood in the long term, regular care and maintenance are advisable. The required maintenance intervals depend, amongst other things, on the location, weather conditions and the chosen coating. Please follow the relevant application and care instructions provided by the manufacturers of the products used.incl. installation post and post anchor352 x 180 cmSpruce, untreatedincl. installation post with post anchor

delivery time: 3-4 weeks

The SKAN HOLZ snow load extension consists of additional rafters that you mount between the existing roof rafters. This reduces the rafter spacing of the carport and increases the overall load-bearing capacity. The number and size of the rafters varies depending on the carport.The snow load increase raises the snow load of the carport to 2.0 kN/m².This snow load increase contains 6 additional rafters and is suitable for the following models:Emsland carport 340 (354) x 846 cmWendland carport 362 x 870 cmSpessart carport 355 x 846 cmColour-treated in walnutPlease note:The snow load cannot be retrofitted to the carports. Please check the snow load limit required in your residential area before assembly.ConstructionThe construction is made of glued laminate timber, consisting of several dried layers, attached to one another with finger-jointing. They are glued onto one another for weather-resistance. This results in a load-bearing beam which is more resistant to warping and less prone to fissures than naturally grown wood.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Snow load increase to sk=2.00 kN/m²Glued laminated timber, colour-treated in walnutSuitable for Emsland carport 340 (354) x 846 cmSuitable for Wendland carport 362 x 870 cmSuitable for carport Spessart 355 x 846 cm

delivery time: 4-5 weeks

The practical SKAN HOLZ sidewall of tongue and groove timber is suited to the SKAN HOLZ gazebo Toulouse.Product featureslight-band of Polycarbonate sheet in clearWidth: 270 cmHeight: 209 cmthickness posts: 12 x 12 cmthickness tongue and groove timber: 1,9 x 11,7 cmincluding mounting bracketsMaterial: nordic sprucecolour-treated in light oakConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Wall with strip light for gazebo Toulouse270 x 209 cmNordic spruceColour-treated in light oak

delivery time: 4-5 weeks

The practical SKAN HOLZ sidewall of solid structural timber with 10 mm-thick Polycarbonate sheet is suited to free-standing SKAN HOLZ terrace roofs of glued laminate with a depth of 400cm and 389cm.Product featuresWidth: 343 cmHeight: 200 cm (including distance form floor)thickness cross-bar: 6 x 6 cmthickness Polycarbonate sheet: 10 mmAluminium profile including EPDM lip-sealsMaterial: sprucenot colour-treatedPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThis kit is supplied untreated in color. This gives you the option to paint the surfaces according to your own design preferences and to match them to their surroundings.As timber used outdoors is exposed to the elements, a suitable protective coat is recommended. To ensure the treatment is as even as possible, the first coat should be applied to all sides of the timber components before assembly. Suitable wood protection products may be used for this purpose in accordance with the manufacturer’s instructions.To preserve the appearance of the wood in the long term, regular care and maintenance are advisable. The required maintenance intervals depend, amongst other things, on the location, weather conditions and the chosen coating. Please follow the relevant application and care instructions provided by the manufacturers of the products used.Sidewall with polycarbonate sheetSuitable for free standing terrace roofsSuitable for a depth of 389 and 400 cmnot Colour-treated

delivery time: 3-4 weeks

Weather-resistant metal gutter set.Length: 2 x 919 cmColour: white coateddiameter gutter 100 mmdiameter downpipe 75 mmconsisting of :gutter(s)downpipeconnection elementsgutter end piecespipe clampsgutter bracketsdownpipe bendscrews for gutter bracketssilicone cartridge for sealingEasy insertion and clamping of parts, one-time gluing of gutter end pieces, no soldering nor welding.Metal gutter setWhiteDiameter gutter 100 mmDiameter downpipe 75 mm

delivery time: 3-4 weeks

Weather-resistant metal gutter set.Length: 2 x 919 cmColour: anthracite coateddiameter gutter 100 mmdiameter downpipe 75 mmconsisting of :gutter(s)downpipeconnection elementsgutter end piecespipe clampsgutter bracketsdownpipe bendscrews for gutter bracketssilicone cartridge for sealingEasy insertion and clamping of parts, one-time gluing of gutter end pieces, no soldering nor welding.Metal gutter setAnthraciteDiameter gutter 100 mmDiameter downpipe 75 mm

delivery time: 3-4 weeks

The SKAN HOLZ snow load extension consists of additional rafters that you mount between the existing roof rafters. This reduces the rafter spacing of the carport and increases the overall load-bearing capacity. The number and size of the rafters varies depending on the carport.The snow load increase raises the snow load of the carport to 2.0 kN/m².This snow load increase contains 6 additional rafters and fits the following models:Friesland carport 546 x 555 cmFriesland carport 557 x 555 cmGreen impregnatedPlease note:The snow load extension cannot be retrofitted to the carports. Please check the snow load limit required in your residential area before assembly.ConstructionThe construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.Colour treatmentThe wooden parts in this kit have been treated at the factory with a water-based preservative. This means the kit can be assembled straight away upon delivery. To ensure the long-term preservation of the wooden surface, it is recommended that the wood be treated further after a sufficient drying and weathering period of approximately 2 to 3 sunny months.Before painting, the surface should be lightly sanded and cleaned. It is then recommended to apply two coats of a wood preservative suitable for outdoor use. Products with UV protection can help to reduce the visual ageing of the wood caused by weathering. Please follow the application instructions provided by the respective manufacturer.Regular maintenance and timely re-treatment help to keep the surface in good condition over the long term. The required maintenance intervals depend on the location, exposure to the elements and the coating system used.Snow load increase to sk=2.00 kN/m²Suitable for Friesland carport 546 x 555 cmSuitable for Friesland carport 557 x 555 cmGreen impregnatedMust be installed during carport assembly

delivery time: 3-4 weeks

The SKAN HOLZ snow load extension consists of additional rafters that you mount between the existing roof rafters. This reduces the rafter spacing of the carport and increases the overall load-bearing capacity. The number and size of the rafters varies depending on the carport.The snow load increase raises the snow load of the carport to 2.0 kN/m².This snow load increase contains 6 additional rafters and is suitable for the following models:Spreewald carport 585 x 589 cmGreen impregnatedPlease note:The snow load extension cannot be retrofitted to the carports. Please check the snow load limit required in your residential area before assembly.ConstructionThe construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.Colour treatmentThe wooden parts in this kit have been treated at the factory with a water-based preservative. This means the kit can be assembled straight away upon delivery. To ensure the long-term preservation of the wooden surface, it is recommended that the wood be treated further after a sufficient drying and weathering period of approximately 2 to 3 sunny months.Before painting, the surface should be lightly sanded and cleaned. It is then recommended to apply two coats of a wood preservative suitable for outdoor use. Products with UV protection can help to reduce the visual ageing of the wood caused by weathering. Please follow the application instructions provided by the respective manufacturer.Regular maintenance and timely re-treatment help to keep the surface in good condition over the long term. The required maintenance intervals depend on the location, exposure to the elements and the coating system used.Snow load increase to sk=2.00 kN/m²Suitable for Spreewald carport 585 x 589 cmGreen impregnatedMust be installed during carport assembly

delivery time: 3-4 weeks