Home
The decorative SKAN HOLZ balustrade of balcony siding is suited to SKAN HOLZ terrace roofs of glued laminate with a depth of 400cm and 389cm.Product featuresWidth: 355 cmHeight: 96 cmthickness cross-bar: 6 x 6 cmthickness balcony board: 1,9 x 12 cmMaterial: nordic sprucenot colour-treatedPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Color treatmentThis building kit is not treated with color. Wood in outdoor areas is constantly exposed to the elements, such as fungus and insect infestations. Regular application of protective coatings is thus essential. Primer should be applied to all sides prior to assembly. First apply wood primer to protect against fungus and insects. Then apply an intermediate and a finishing coat of premium wood varnish or paint to protect against color change and damage. Calculate service intervals of about 4-5 years, prior to the appearance of visible damage. Follow the processing guidelines of the varnish manufacturer.Balustrade balcony sidingNordic spruceSuitable for terrace roofs with a depth of 400 cmnot Colour-treated
delivery time: 3-4 weeks
Carport single windowexterior frame dimensions: 69,1 x 82,1 cminterior frame dimensions: 57,5 x 70,5 cminstallation dimension: 66,1 x 82,5 cmwith turn/tilt functionreal glassMaterial: nordic sprucecolour-treated in slate greySingle window for CarportsExterior frame dimensions: 69.1 x 82.1 cmInterior frame dimensions: 57.5 x 70.5 cmColour-treated in slate grey
delivery time: 4-5 weeks
The decorative SKAN HOLZ balustrade of balcony siding is suited to SKAN HOLZ terrace roofs of glued laminate with a depth of 300cm and 289cm.Product featuresWidth: 255 cmHeight: 96 cmthickness cross-bar: 6 x 6 cmthickness balcony board: 1,9 x 12 cmMaterial: nordic sprucecolour-treated in light oakPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Color treatmentThe color pre-treated parts of the building kit are treated with premium varnish and paint. This protects wood from blue stain and UV damage, as well as from swelling and fading, while still allowing the wooden texture to shine through. At the factory, parts are flow-coated twice on all sides with varnish and the excess subsequently brushed off.You can begin with assembly immediately upon delivery, there is no need for cumbersome priming and painting. Every building kit includes enough touch-up paint or varnish to repair damage and cover screws and cut surfaces at least two times.If you wish to further enhance the surface, lightly sand the visible surfaces and coat them with premium varnish or paint after assembly. Traces of storage on all-round color-treated components are due to technical reasons.Balustrade balcony sidingNordic spruceSuitable for terrace roofs with a depth of 300 cmColour-treated in light oak
delivery time: 4-5 weeks
Carport single windowexterior frame dimensions: 69,1 x 82,1 cminterior frame dimensions: 57,5 x 70,5 cminstallation dimension: 66,1 x 82,5 cmwith turn/tilt functionreal glassMaterial: nordic sprucecolour-treated in whiteSingle window for CarportsExterior frame dimensions: 69.1 x 82.1 cmInterior frame dimensions: 57.5 x 70.5 cmColour-treated in white
delivery time: 4-5 weeks
Carport single windowexterior frame dimensions: 69,1 x 82,1 cminterior frame dimensions: 57,5 x 70,5 cminstallation dimension: 66,1 x 82,5 cmwith turn/tilt functionreal glassMaterial: nordic sprucecolour-treated in anthraciteSingle window for CarportsExterior frame dimensions: 69.1 x 82.1 cmInterior frame dimensions: 57.5 x 70.5 cmColour-treated in anthracite
delivery time: 4-5 weeks
The decorative SKAN HOLZ balustrade of balcony siding is suited to SKAN HOLZ terrace roofs of glued laminate with post spacing of 270 cm.Product featuresWidth: 270 cmHeight: 96 cmthickness cross-bar: 6 x 6 cmthickness balcony board: 1,9 x 12 cmMaterial: nordic sprucecolour-treated in light oakPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Color treatmentThe color pre-treated parts of the building kit are treated with premium varnish and paint. This protects wood from blue stain and UV damage, as well as from swelling and fading, while still allowing the wooden texture to shine through. At the factory, parts are flow-coated twice on all sides with varnish and the excess subsequently brushed off.You can begin with assembly immediately upon delivery, there is no need for cumbersome priming and painting. Every building kit includes enough touch-up paint or varnish to repair damage and cover screws and cut surfaces at least two times.If you wish to further enhance the surface, lightly sand the visible surfaces and coat them with premium varnish or paint after assembly. Traces of storage on all-round color-treated components are due to technical reasons.Balustrade balcony sidingSuitable for post spacing of 270 cmNordic spruceColour-treated in light oak
delivery time: 4-5 weeks
The decorative SKAN HOLZ balustrade of balcony siding is suited to SKAN HOLZ terrace roofs of glued laminate with post spacing of 270 cm.Product featuresWidth: 270 cmHeight: 96 cmthickness cross-bar: 6 x 6 cmthickness balcony board: 1,9 x 12 cmMaterial: nordic sprucecolour-treated in walnutPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Color treatmentThe color pre-treated parts of the building kit are treated with premium varnish and paint. This protects wood from blue stain and UV damage, as well as from swelling and fading, while still allowing the wooden texture to shine through. At the factory, parts are flow-coated twice on all sides with varnish and the excess subsequently brushed off.You can begin with assembly immediately upon delivery, there is no need for cumbersome priming and painting. Every building kit includes enough touch-up paint or varnish to repair damage and cover screws and cut surfaces at least two times.If you wish to further enhance the surface, lightly sand the visible surfaces and coat them with premium varnish or paint after assembly. Traces of storage on all-round color-treated components are due to technical reasons.Balustrade balcony sidingSuitable for post spacing of 270 cmNordic spruceColour-treated in walnut
delivery time: 4-5 weeks
The decorative SKAN HOLZ balustrade with solid St. Andrew`s crosses of solid structural timber is suited to SKAN HOLZ terrace roofs of glued laminate timber with post spacing of 170 cm.Product featuresWidth: 170 cmHeight: 84 cm (+arbitrary distance form floor)thickness cross beams: 10 x 10 cmthickness St. Andrew`s cross: 8 x 8 cmMaterial: sprucecolour-treated in slate greyPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Color treatmentThe color pre-treated parts of the building kit are treated with premium varnish and paint. This protects wood from blue stain and UV damage, as well as from swelling and fading, while still allowing the wooden texture to shine through. At the factory, parts are flow-coated twice on all sides with varnish and the excess subsequently brushed off.You can begin with assembly immediately upon delivery, there is no need for cumbersome priming and painting. Every building kit includes enough touch-up paint or varnish to repair damage and cover screws and cut surfaces at least two times.If you wish to further enhance the surface, lightly sand the visible surfaces and coat them with premium varnish or paint after assembly. Traces of storage on all-round color-treated components are due to technical reasons.Balustrade St.Andrew`s crossSuitable for post spacing of 170 cmNordic spruceColour-treated in slate grey
delivery time: 4-5 weeks
Side wall made of profiled boarding for installation under a SKAN HOLZ carportProfiled formwork consists of 20 mm thick profiled boards supplied loose, which are fitted together and mounted between the posts.Product featuresWidth: 141 cmHeight: 330 cmThickness: 20 mmMaterial: SpruceColour-treated in slate greyConstructionThe construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.Color treatmentThe color pre-treated parts of the building kit are treated with premium varnish and paint. This protects wood from blue stain and UV damage, as well as from swelling and fading, while still allowing the wooden texture to shine through. At the factory, parts are flow-coated twice on all sides with varnish and the excess subsequently brushed off.You can begin with assembly immediately upon delivery, there is no need for cumbersome priming and painting. Every building kit includes enough touch-up paint or varnish to repair damage and cover screws and cut surfaces at least two times.If you wish to further enhance the surface, lightly sand the visible surfaces and coat them with premium varnish or paint after assembly. Traces of storage on all-round color-treated components are due to technical reasons.Side wall made of profiled formworkFor installation in a Friesland carportColour-treated in slate greyHeight of 330 cmFor a post spacing of 141 cm
delivery time: 3-4 weeks
The decorative SKAN HOLZ balustrade with solid St. Andrew`s crosses of solid structural timber is suited to SKAN HOLZ terrace roofs of glued laminate timber with post spacing of 170 cm.Product featuresWidth: 170 cmHeight: 84 cm (+arbitrary distance form floor)thickness cross beams: 10 x 10 cmthickness St. Andrew`s cross: 8 x 8 cmMaterial: sprucecolour-treated in anthracitePhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Color treatmentThe color pre-treated parts of the building kit are treated with premium varnish and paint. This protects wood from blue stain and UV damage, as well as from swelling and fading, while still allowing the wooden texture to shine through. At the factory, parts are flow-coated twice on all sides with varnish and the excess subsequently brushed off.You can begin with assembly immediately upon delivery, there is no need for cumbersome priming and painting. Every building kit includes enough touch-up paint or varnish to repair damage and cover screws and cut surfaces at least two times.If you wish to further enhance the surface, lightly sand the visible surfaces and coat them with premium varnish or paint after assembly. Traces of storage on all-round color-treated components are due to technical reasons.Balustrade St.Andrew`s crossSuitable for post spacing of 170 cmNordic spruceColour-treated in anthracite
delivery time: 4-5 weeks
The SKAN HOLZ double-window with turn function features real glass panels and fitted glazing bars. The glazing bars can be mounted or omitted. The frame structure is designed to be pushed into a 28 mm-thick log-plank wall. Supplied with hardware, but no other mounting material.Product featuresaperture dimensions: 2 x 57,5 x 70,5 cmexterior frame dimensions: 127 x 77 cmreal glassturn functionMaterial: nordic sprucenot colour-treatedDouble windowAperture dimensions: 2 x 57.5 x 70.5 cmExterior frame dimensions: 127 x 77 cmReal glass
delivery time: 3-4 weeks
The decorative SKAN HOLZ balustrade with solid St. Andrew`s crosses of solid structural timber is suited to SKAN HOLZ terrace roofs of glued laminate timber with post spacing of 170 cm.Product featuresWidth: 170 cmHeight: 84 cm (+arbitrary distance form floor)thickness cross beams: 10 x 10 cmthickness St. Andrew`s cross: 8 x 8 cmMaterial: sprucecolour-treated in whitePhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Color treatmentThe color pre-treated parts of the building kit are treated with premium varnish and paint. This protects wood from blue stain and UV damage, as well as from swelling and fading, while still allowing the wooden texture to shine through. At the factory, parts are flow-coated twice on all sides with varnish and the excess subsequently brushed off.You can begin with assembly immediately upon delivery, there is no need for cumbersome priming and painting. Every building kit includes enough touch-up paint or varnish to repair damage and cover screws and cut surfaces at least two times.If you wish to further enhance the surface, lightly sand the visible surfaces and coat them with premium varnish or paint after assembly. Traces of storage on all-round color-treated components are due to technical reasons.Balustrade St.Andrew`s crossSuitable for post spacing of 170 cmNordic spruceColour-treated in white
delivery time: 4-5 weeks
The SKAN HOLZ snow load extension consists of additional rafters that you mount between the existing roof rafters. This reduces the rafter spacing of the carport and increases the overall load-bearing capacity. The number and size of the rafters varies depending on the carport.The snow load increase raises the snow load of the carport to 2.0 kN/m².This snow load increase contains 4 additional rafters and is suitable for the following models:Emsland carport 340 (354) x 604 cmWendland carport 362 x 628 cmSpessart carport 355 x 604 cmColour-treated in slate greyPlease note:The snow load cannot be retrofitted to the carports. Please check the snow load limit required in your residential area before assembly.ConstructionThe construction is made of glued laminate timber, consisting of several dried layers, attached to one another with finger-jointing. They are glued onto one another for weather-resistance. This results in a load-bearing beam which is more resistant to warping and less prone to fissures than naturally grown wood.Color treatmentThe color pre-treated parts of the building kit are treated with premium varnish and paint. This protects wood from blue stain and UV damage, as well as from swelling and fading, while still allowing the wooden texture to shine through. At the factory, parts are flow-coated twice on all sides with varnish and the excess subsequently brushed off.You can begin with assembly immediately upon delivery, there is no need for cumbersome priming and painting. Every building kit includes enough touch-up paint or varnish to repair damage and cover screws and cut surfaces at least two times.If you wish to further enhance the surface, lightly sand the visible surfaces and coat them with premium varnish or paint after assembly. Traces of storage on all-round color-treated components are due to technical reasons.Snow load increase to sk=2.00 kN/m²Glued laminated timber, colour-treated in slate greySuitable for Emsland carport 340 (354) x 604 cmSuitable for Wendland carport 362 x 628 cmSuitable for carport Spessart 355 x 604 cm
delivery time: 4-5 weeks
The practical SKAN HOLZ sidewall of solid structural timber with 10 mm-thick Polycarbonate sheet is suited to free-standing SKAN HOLZ terrace roofs of glued laminate with a depth of 250cm and 239cm.Product featuresWidth: 193 cmHeight: 200 cm (including distance form floor)thickness cross-bar: 6 x 6 cmthickness Polycarbonate sheet: 10 mmAluminium profile including EPDM lip-sealsMaterial: sprucecolour-treated in walnutPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Color treatmentThe color pre-treated parts of the building kit are treated with premium varnish and paint. This protects wood from blue stain and UV damage, as well as from swelling and fading, while still allowing the wooden texture to shine through. At the factory, parts are flow-coated twice on all sides with varnish and the excess subsequently brushed off.You can begin with assembly immediately upon delivery, there is no need for cumbersome priming and painting. Every building kit includes enough touch-up paint or varnish to repair damage and cover screws and cut surfaces at least two times.If you wish to further enhance the surface, lightly sand the visible surfaces and coat them with premium varnish or paint after assembly. Traces of storage on all-round color-treated components are due to technical reasons.Sidewall with polycarbonate sheetSuitable for free standing terrace roofsSuitable for a depth of 239 and 250 cmColour-treated in walnut
delivery time: 4-5 weeks
The SKAN HOLZ snow load extension consists of additional rafters that you mount between the existing roof rafters. This reduces the rafter spacing of the carport and increases the overall load-bearing capacity. The number and size of the rafters varies depending on the carport.The snow load increase raises the snow load of the carport to 2.0 kN/m².This snow load increase contains 4 additional rafters and is suitable for the following models:Emsland carport 340 (354) x 604 cmWendland carport 362 x 628 cmSpessart carport 355 x 604 cmColour-treated in anthracitePlease note:The snow load cannot be retrofitted to the carports. Please check the snow load limit required in your residential area before assembly.ConstructionThe construction is made of glued laminate timber, consisting of several dried layers, attached to one another with finger-jointing. They are glued onto one another for weather-resistance. This results in a load-bearing beam which is more resistant to warping and less prone to fissures than naturally grown wood.Color treatmentThe color pre-treated parts of the building kit are treated with premium varnish and paint. This protects wood from blue stain and UV damage, as well as from swelling and fading, while still allowing the wooden texture to shine through. At the factory, parts are flow-coated twice on all sides with varnish and the excess subsequently brushed off.You can begin with assembly immediately upon delivery, there is no need for cumbersome priming and painting. Every building kit includes enough touch-up paint or varnish to repair damage and cover screws and cut surfaces at least two times.If you wish to further enhance the surface, lightly sand the visible surfaces and coat them with premium varnish or paint after assembly. Traces of storage on all-round color-treated components are due to technical reasons.Snow load increase to sk=2.00 kN/m²Glued laminated timber, colour-treated in anthraciteSuitable for Emsland carport 340 (354) x 604 cmSuitable for Wendland carport 362 x 628 cmSuitable for carport Spessart 355 x 604 cm
delivery time: 4-5 weeks
The SKAN HOLZ snow load extension consists of additional rafters that you mount between the existing roof rafters. This reduces the rafter spacing of the carport and increases the overall load-bearing capacity. The number and size of the rafters varies depending on the carport.The snow load increase raises the snow load of the carport to 2.0 kN/m².This snow load increase contains 4 additional rafters and is suitable for the following models:Emsland carport 340 (354) x 604 cmWendland carport 362 x 628 cmSpessart carport 355 x 604 cmColour-treated in whitePlease note:The snow load cannot be retrofitted to the carports. Please check the snow load limit required in your residential area before assembly.ConstructionThe construction is made of glued laminate timber, consisting of several dried layers, attached to one another with finger-jointing. They are glued onto one another for weather-resistance. This results in a load-bearing beam which is more resistant to warping and less prone to fissures than naturally grown wood.Color treatmentThe color pre-treated parts of the building kit are treated with premium varnish and paint. This protects wood from blue stain and UV damage, as well as from swelling and fading, while still allowing the wooden texture to shine through. At the factory, parts are flow-coated twice on all sides with varnish and the excess subsequently brushed off.You can begin with assembly immediately upon delivery, there is no need for cumbersome priming and painting. Every building kit includes enough touch-up paint or varnish to repair damage and cover screws and cut surfaces at least two times.If you wish to further enhance the surface, lightly sand the visible surfaces and coat them with premium varnish or paint after assembly. Traces of storage on all-round color-treated components are due to technical reasons.Snow load increase to sk=2.00 kN/m²Glued laminated timber, Colour-treated in whiteSuitable for Emsland carport 340 (354) x 604 cmSuitable for Wendland carport 362 x 628 cmSuitable for carport Spessart 355 x 604 cm
delivery time: 4-5 weeks
Practical awning set for SKAN HOLZ terrace roofs in sizes 541 x 300 cm, 541 x 257 cm and 541 x 289 cm.Product featuresComplete set of 5 awnings à 96 x 275 cmwater-repellent100% UV stable, textile polyester in whitemounting material consisting of suspension system with protective cap, barrel hook and stoppersAwning washable to 40°CAwnings should be taken in when storms threaten.Sun sailTextile polyester in white100% UV stableWater-repellent
delivery time: 2-3 weeks
The decorative SKAN HOLZ balustrade with solid St. Andrew's crosses of Douglas fir is suited to the SKAN HOLZ gazebo Lyon 3.Product featuresWidth: 180 cmHeight: 84 cm (+arbitrary distance form floor)thickness cross beams: 10 x 10 cmthickness St. Andrew`s cross: 8 x 8 cmMaterial: douglas firnot colour-treatedPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of Douglas fir. The reddish heart wood of the Douglas fir contains resin and oils that are resistant against fungus and insect infestations. We use technically-dried Douglas fir which, depending on length, is partly weatherproofed by finger jointing. This type of wood features high surface hardness. Fissures, branches and twists reflect the natural materials used.If Douglas fir is not treated with varnish, a glossy grey-silver patina forms over time. It protects the built structure from environmental challenges, and you from time-consuming wood maintenance.Color treatmentThe wooden parts of this building kit are not color treated. If building kits of Douglas fir are assembled without chemical wood protection, no further treatment than regular cleaning of the patina with water is required.If the natural texture of the wood is to be maintained, regular application of a protective coating is recommended. All-round coating should be applied prior to assembly. First apply wood primer. Then apply an intermediate and a finishing coat of premium wood varnish or paint to protect against color change and damage. Calculate service intervals of about 4-5 years, prior to the appearance of visible damage. Follow the processing guidelines of the varnish manufacturer.Balustrade St.Andrew`s crossSuitable for post spacing of 180 cmDouglas firnot Colour-treated
delivery time: 3-4 weeks
The SKAN HOLZ increased snow-load consists of additional rafter triangles that you mount between the existing rafter triangles. In this way you reduce the rafter spacing of the carport and thereby increase the overall load capacity. The number and size of the rafters varies depending on the carport.Increased snow load increases the snow load of the carport to 3,25 kN/m².This increased snow load fits the following models:Carport Wallgau 380 x 900 cmGreen impregnatedPlease be aware:Increased snow load cannot subsequently be backfitted on the carports. Before assembling, please find out what the snow-load limit is in your area.ConstructionThe construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.Color treatmentWater-based impregnation protects the wooden components of this building kit from fungus and insect infestations. The building kit can be assembled immediately upon delivery. The wooden surface should be further treated no sooner than 2-3 sunny months later, after the excess impregnation has dried. Lightly sand and clean the surface prior to coating. Apply two coats of premium wood varnish to the surface. Look for good UV protection of the products and follow the guidelines of the varnish manufacturer. Calculate service intervals of about 4-5 years, prior to the appearance of visible damage. Follow the processing guidelines of the varnish manufacturer.Snow load380 x 900 cmStructure of impregnated softwoodGreen impregnated
delivery time: 3-4 weeks
Practical awning set for SKAN HOLZ terrace roofs in sizes 434 x 400 cm, 434 x 357 cm and 434 x 389 cm.Product featuresComplete set of 4 awnings à 96 x 380 cmwater-repellent100% UV stable, textile polyester in whitemounting material consisting of suspension system with protective cap, barrel hook and stoppersAwning washable to 40°CAwnings should be taken in when storms threaten.Sun sailTextile polyester in white100% UV stableWater-repellent
delivery time: 2-3 weeks
The SKAN HOLZ double-window with turn/tilt function features real glass panels and fitted glazing bars. The glazing bars can be mounted or omitted. The frame structure is designed to be pushed into a 45 mm-thick log wall. Supplied with hardware, but no other mounting material.Product featuresaperture dimensions: 2 x 57,5 x 70,5 cmexterior frame dimensions: 127 x 77 cmreal glasswith turn/tilt functionMaterial: nordic sprucenot colour-treatedDouble windowAperture dimensions: 2 x 57,5 x 70,5 cmExterior frame dimensions: 127 x 77 cmReal glass
delivery time: 3-4 weeks
The practical SKAN HOLZ sidewall of solid structural timber with 10 mm-thick Polycarbonate sheet is suited to free-standing SKAN HOLZ terrace roofs of glued laminate with a depth of 250cm and 239cm.Product featuresWidth: 193 cmHeight: 200 cm (including distance form floor)thickness cross-bar: 6 x 6 cmthickness Polycarbonate sheet: 10 mmAluminium profile including EPDM lip-sealsMaterial: sprucecolour-treated in light oakPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Color treatmentThe color pre-treated parts of the building kit are treated with premium varnish and paint. This protects wood from blue stain and UV damage, as well as from swelling and fading, while still allowing the wooden texture to shine through. At the factory, parts are flow-coated twice on all sides with varnish and the excess subsequently brushed off.You can begin with assembly immediately upon delivery, there is no need for cumbersome priming and painting. Every building kit includes enough touch-up paint or varnish to repair damage and cover screws and cut surfaces at least two times.If you wish to further enhance the surface, lightly sand the visible surfaces and coat them with premium varnish or paint after assembly. Traces of storage on all-round color-treated components are due to technical reasons.Sidewall with polycarbonate sheetSuitable for free standing terrace roofsSuitable for a depth of 239 and 250 cmColour-treated in light oak
delivery time: 4-5 weeks
The SKAN HOLZ snow load extension consists of additional rafters that you mount between the existing roof rafters. This reduces the rafter spacing of the carport and increases the overall load-bearing capacity. The number and size of the rafters varies depending on the carport.The snow load increase raises the snow load of the carport to 2.0 kN/m².This snow load increase contains 8 additional rafters and fits the following models:Friesland carport 397 x 708 cmFriesland carport 402 x 708 cmSpreewald carport 396 x 741 cmGreen impregnatedPlease note:The snow load cannot be retrofitted to the carports. Please check the snow load limit required in your residential area before assembly.ConstructionThe construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.Color treatmentWater-based impregnation protects the wooden components of this building kit from fungus and insect infestations. The building kit can be assembled immediately upon delivery. The wooden surface should be further treated no sooner than 2-3 sunny months later, after the excess impregnation has dried. Lightly sand and clean the surface prior to coating. Apply two coats of premium wood varnish to the surface. Look for good UV protection of the products and follow the guidelines of the varnish manufacturer. Calculate service intervals of about 4-5 years, prior to the appearance of visible damage. Follow the processing guidelines of the varnish manufacturer.Snow load increase to sk=2.00 kN/m²Suitable for Friesland carport 402 x 708 cmSuitable for Friesland carport 397 x 708 cmSuitable for Spreewald carport 396 x 741 cmMust be installed during carport assembly
delivery time: 3-4 weeks
Siding for installation in a SKAN HOLZ CarportSiding consists of loose boarding in 20 mm thickness, and is not installed until the carport has been completely erected. It provides for increased stability, privacy shield from the side, and protection from wind and overgrown hedges.Product featuresWidth: 230 cmHeight: 220 cmthickness siding: 2 x 12 cmMaterial: nordic sprucenot colour-treatedPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Color treatmentThis building kit is not treated with color. Wood in outdoor areas is constantly exposed to the elements, such as fungus and insect infestations. Regular application of protective coatings is thus essential. Primer should be applied to all sides prior to assembly. First apply wood primer to protect against fungus and insects. Then apply an intermediate and a finishing coat of premium wood varnish or paint to protect against color change and damage. Calculate service intervals of about 4-5 years, prior to the appearance of visible damage. Follow the processing guidelines of the varnish manufacturer.Sidewall, nordic sprucePanels with vertical slatsSuitable for post spacing of 230 cmnot Colour-treated
delivery time: 3-4 weeks