Terrace roof Rimini 434 x 300 cm, douglas fir, colour pre-treated walnut

Weather-resistant metal gutter set.Length: 434 cmColour: anthracite coateddiameter gutter 100 mmdiameter downpipe 75 mmconsisting of :gutter(s)downpipeconnection elementsgutter end piecespipe clampsgutter bracketsdownpipe bendscrews for gutter bracketssilicone cartridge for sealingEasy insertion and clamping of parts, one-time gluing of gutter end pieces, no soldering nor welding.Metal gutter setAnthraciteDiameter gutter 100 mmDiameter downpipe 75 mm

Create a water-tight seal for your wall.Wall connection profile is a practical complete set:4 folded aluminium profiles in 104 cm lengthincluding sealing stripscrewssilicone for sealing on the house wallThe profiles fit the SKAN HOLZ terrace roof with 434 cm width.Wall connection profilefor terrace roof with 434 cm width4 folded aluminium profiles in 104 cm lengthIncluding silicone

Practical complete set for wall mounting SKAN HOLZ terrace roofs or canopies to 434 cm width. consisting of :400 mm threaded rod in 12 mm diametercapped nutswashersperforated sleeves in 20 mm diametertwo-component adhesive mortarIntended for uninsulated sand-lime brick, honeycomb-brick and concrete masonry. Computation of quantities based on spacing between individual mountings of 50 cm.Set for wall mountingSize 2consisting of 400 mm threaded rod in 12 mm diameterIncluding two-component adhesive mortar

Practical awning set for SKAN HOLZ terrace roofs in sizes 434 x 300 cm, 434 x 257 cm and 434 x 289 cm.Product featuresComplete set of 4 awnings à 96 x 275 cmwater-repellent100% UV stable, textile polyester in whitemounting material consisting of suspension system with protective cap, barrel hook and stoppersAwning washable to 40°CAwnings should be taken in when storms threaten.Sun sailTextile polyester in white100% UV stableWater-repellent

The decorative SKAN HOLZ parapet of solid structural timber is suited to SKAN HOLZ terrace roofs of Douglas fir with post spacing of 170 cm.Product featuresWidth: 170 cmHeight: 84 cm (+arbitrary distance form floor)thickness hand rail: 5 x 13 cmthickness siding: 2 x 12 cmMaterial: douglas fircolour-treated in walnutPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of Douglas fir. The reddish heart wood of the Douglas fir contains resin and oils that are resistant against fungus and insect infestations. We use technically-dried Douglas fir which, depending on length, is partly weatherproofed by finger jointing. This type of wood features high surface hardness. Fissures, branches and twists reflect the natural materials used.If Douglas fir is not treated with varnish, a glossy grey-silver patina forms over time. It protects the built structure from environmental challenges, and you from time-consuming wood maintenance.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Balustrade sidingSuitable for post spacing of 170 cmDouglas firColour-treated in walnut

The decorative SKAN HOLZ balustrade with solid St. Andrew's crosses of solid structural timber is suited to SKAN HOLZ terrace roofs of Douglas fir with post spacing of 170 cm.Product featuresWidth: 170 cmHeight: 84 cm (+arbitrary distance form floor)thickness cross beams: 10 x 10 cmthickness St. Andrew`s cross: 8 x 8 cmMaterial: douglas fircolour-treated in walnutPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of Douglas fir. The reddish heart wood of the Douglas fir contains resin and oils that are resistant against fungus and insect infestations. We use technically-dried Douglas fir which, depending on length, is partly weatherproofed by finger jointing. This type of wood features high surface hardness. Fissures, branches and twists reflect the natural materials used.If Douglas fir is not treated with varnish, a glossy grey-silver patina forms over time. It protects the built structure from environmental challenges, and you from time-consuming wood maintenance.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Balustrade St.Andrew`s crossSuitable for post spacing of 170 cmDouglas firColour-treated in walnut

The decorative SKAN HOLZ sidewall of Polycarbonate sheets is suited to SKAN HOLZ terrace roofs of Douglas fir with a depth 300 cm.Product featuresWidth: 255 cmHeight: 200 cm (including distance form floor)thickness cross-bar: 6 x 6 cmthickness Polycarbonate sheet: 10 mmMaterial: douglas fircolour-treated in walnutPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of Douglas fir. The reddish heart wood of the Douglas fir contains resin and oils that are resistant against fungus and insect infestations. We use technically-dried Douglas fir which, depending on length, is partly weatherproofed by finger jointing. This type of wood features high surface hardness. Fissures, branches and twists reflect the natural materials used.If Douglas fir is not treated with varnish, a glossy grey-silver patina forms over time. It protects the built structure from environmental challenges, and you from time-consuming wood maintenance.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Sidewall with polycarbonateSuitable for terrace roofs with a depth of 300 cmdouglas firColour-treated in walnut

The decorative SKAN HOLZ sidewall of solid structural timber is suited to SKAN HOLZ terrace roofs of Douglas fir with a depth of 300 cm.Product featuresWidth: 255 cmHeight: 160 cmthickness siding: 2 x 12 cmMaterial: douglas fircolour-treated in walnutPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of Douglas fir. The reddish heart wood of the Douglas fir contains resin and oils that are resistant against fungus and insect infestations. We use technically-dried Douglas fir which, depending on length, is partly weatherproofed by finger jointing. This type of wood features high surface hardness. Fissures, branches and twists reflect the natural materials used.If Douglas fir is not treated with varnish, a glossy grey-silver patina forms over time. It protects the built structure from environmental challenges, and you from time-consuming wood maintenance.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Sidewall sidingSuitable for terrace roofs with a depth of 300 cmdouglas firColour-treated in walnut

The decorative SKAN HOLZ sidewall with solid St. Andrew's crosses of Douglas fir is suited to SKAN HOLZ terrace roofs of Douglas fir with a depth 300 cm.Product featuresWidth: 255 cmHeight: 210 cmthickness cross beams: 10 x 10 cmthickness St. Andrew`s cross: 8 x 8 cmthickness posts: 12 x 12 cmincluding mounting bracket(s)Material: douglas fircolour-treated in walnutPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of Douglas fir. The reddish heart wood of the Douglas fir contains resin and oils that are resistant against fungus and insect infestations. We use technically-dried Douglas fir which, depending on length, is partly weatherproofed by finger jointing. This type of wood features high surface hardness. Fissures, branches and twists reflect the natural materials used.If Douglas fir is not treated with varnish, a glossy grey-silver patina forms over time. It protects the built structure from environmental challenges, and you from time-consuming wood maintenance.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Sidewall St.Andrew`s crossSuitable for terrace roofs with a depth of 300 cmdouglas firColour-treated in walnut

Do you need longer posts?Order the post extension for your terrace roof of Douglas fir. The posts in the building kit are then replaced with longer posts.Product featuresThickness: 12 x 12 cmMaterial: douglas fircolour-treated in walnutAttention: the surcharge applies per post, and they can only be ordered directly with the carport/terrace roof.Post extension 12x12cm in running meters12 x 12 cmDouglas firColour-treated in walnut