Skip to main content Skip to search Skip to main navigation

Round roof-Carport Franken 635 x 541 cm, colour pre-treated anthracite

Premium quality for your garden
  Assembly instructions Data sheet

SKAN HOLZ Carport Franken


  • Round-roof carport
  • Exterior dimensions 635 x 541 cm
  • solid structure of high quality glued laminate (BSH spruce)
  • colour-treated in anthracite
  • posts 14 x 14 cm including H-post anchor
  • Roofing 16 mm Polycarbonate sheet in clear



Construction


The construction is made of glued laminate timber, consisting of several dried layers, attached to one another with finger-jointing. They are glued onto one another for weather-resistance. This results in a load-bearing beam which is more resistant to warping and less prone to fissures than naturally grown wood.


Colour treatment


The colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.


Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.


For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.


Roof covering


The roof cladding consists of 16 mm thick polycarbonate multiwall sheets. The upper surface is coated with a UV-reflective layer. These are secured using aluminium profiles with EPDM lip seals.


Bracing


The building kit includes 60 cm-long H-post anchors of galvanized flat steel for embedding in concrete in the site-built deep foundation (for size and lay-out see assembly instructions). They firmly connect the posts to the subsurface to ensure high stability.


  • Round-roof carport
  • Solid structure of glued laminate (BSH spruce)
  • Colour-treated in anthracite
  • Roofing: Polycarbonate sheet in clear
  • Posts 14 x 14 cm
Material: Glulam, spruce
Color: Anthracite
Color treatment: Stained
Size: 635 x 541 cm
Basic width: 578 cm
Basic length: 442 cm
Total width: 635 cm
Total length: 541 cm
Roof ridge height: 325 cm
Roof eave height: 226 cm
Total height (front): 325 cm
Total height (behind): 325 cm
Roof shape: Round roof
Material roof covering: Polycarbonate multiwall sheets
Color roofing: Transparent
Roof thickness: 16 mm
Roof surface: 35.71 m²
Roof slope: to the side
Roof overhang (front): 49.5 cm
Roof overhang (behind): 49.5 cm
roof overhang (left): 28 cm
roof overhang (right): 28 cm
Base surface: 34.35 m²
Building volume: 97.07 m³
Passage width: 550 cm
Passage height (front): 220 cm
Passage height (behind): 220 cm
Thickness of posts: 14 x 14 cm
Post length: 220 cm
Post spacing (width): 550 cm
Post spacing (depth): 200 cm
Number of posts: 6 Piece
Anchoring: Post anchors
Snow load: 1.25 kN/m²
Wind pressure: 0.95 kN/m²
Surface wood: 54.13 m²
Type of installation: Free standing
Mounting material: Included
delivery time: 4-5 weeks
Number of packages: 2
package weight 1: 492 kg
packaging width 1: 660 cm
packaging height 1: 45 cm
packaging length 1: 120 cm
package weight 2: 300 kg
packaging width 2: 635 cm
packaging height 2: 45 cm
packaging length 2: 120 cm
Total weight: 792 kg
Included in delivery: H-post anchors, mounting material, assembly instructions
Not inclusiv: Cement
Garantie: 5 years according to our warranty conditions
delivery Note: Road that must support a 38t truck (Germany, mainland)
Skip product gallery

Accessories

Produktbild: Seitenwand aus Deckelschalung 230 x 180 cm
Sidewall for glulam carports 230 x 180 cm, spruce, colour pre-treated in anthracite

Siding for installation in a SKAN HOLZ CarportSiding consists of loose boarding in 20 mm thickness, and is not installed until the carport has been completely erected. It provides for increased stability, privacy shield from the side, and protection from wind and overgrown hedges.Product featuresWidth: 230 cmHeight: 180 cmthickness siding: 2 x 12 cmMaterial: nordic sprucecolour-treated in anthracitePhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Sidewall, nordic sprucePanels with vertical slatsSuitable for post spacing of 230 cmColour-treated in anthracite

Regular price: €559.00
Produktbild: Seitenwand aus Deckelschalung 230 x 220 cm
Sidewall for glulam carports 230 x 220 cm, spruce, colour pre-treated in anthracite

Siding for installation in a SKAN HOLZ CarportSiding consists of loose boarding in 20 mm thickness, and is not installed until the carport has been completely erected. It provides for increased stability, privacy shield from the side, and protection from wind and overgrown hedges.Product featuresWidth: 230 cmHeight: 220 cmthickness siding: 2 x 12 cmMaterial: nordic sprucecolour-treated in anthracitePhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Sidewall, nordic sprucePanels with vertical slatsSuitable for post spacing of 230 cmColour-treated in anthracite

Regular price: €649.00
Produktbild: Rückwand aus Deckelschalung 550 x 180 cm
Backwall for glulam carports 550 x 180 cm, spruce, colour pre-treated in anthracite

Backwall of siding for installation in a SKAN HOLZ CarportSiding consists of loose boarding in 20 mm thickness, and is not installed until the carport has been completely erected. It provides for increased stability, privacy shield from the side, and protection from wind and overgrown hedges.Product featuresWidth: 550 cmHeight: 180 cmthickness siding: 2 x 12 cmincluding H-post anchorMaterial: nordic sprucecolour-treated in anthracitePhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Backwall, nordic sprucePanels with vertical slatsSuitable for post spacing of 550 cmColour-treated in anthracite

Regular price: €1,669.00
Produktbild: Rückwand aus Deckelschalung 550 x 220 cm
Backwall for glulam carports 550 x 220 cm, spruce, colour pre-treated in anthracite

Backwall of siding for installation in a SKAN HOLZ CarportSiding consists of loose boarding in 20 mm thickness, and is not installed until the carport has been completely erected. It provides for increased stability, privacy shield from the side, and protection from wind and overgrown hedges.Product featuresWidth: 550 cmHeight: 220 cmthickness siding: 2 x 12 cmincluding H-post anchorMaterial: nordic sprucecolour-treated in anthracitePhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Colour treatmentThe colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.Backwall, nordic sprucePanels with vertical slatsSuitable for post spacing of 550 cmColour-treated in anthracite

Regular price: €1,855.00
Post extension 14x14cm in running meters, glulam, colour pre-treated in anthracite
Post extension 14x14cm in running meters, glulam, colour pre-treated in anthracite

Do you need longer posts?Order the post extension for your terrace roof or carport of glued laminate. The posts in the building kits are then replaced with longer posts.Product featuresThickness: 14 x 14 cmMaterial: glulam, sprucecolour-treated in anthraciteAttention: the surcharge applies per post, and they can only be ordered directly with the carport/terrace roof.Post extension 14x14cm in running meters14 x 14 cmGlued laminateColour-treated in anthracite

€72.52 / m *