SKAN HOLZ Log cabin Tournai 2
- Size 420 x 300 cm
- colour slate grey
- high-quality Nordic spruce
- 4-side planed 28 mmwall logs with tongue and groove
- bolted corner connection
- floor 19 mmincluding impregnated ground supports
- 3 panel sliding glass door
- Door with moulded cylinder lock and 3 keys
- Door clear opening door w x h 200 x 204 cm
- Door exterior frame dimensions w x h 300 x 210 cm
- The panorama windows are fixed, glass panel can be removed by releasing snap closures
- Roof 19 mmtongue-and-groove roof boarding
- Due to low roof pitch, roofing with shingles not possible (KSK-M roofing membrane optionally available)
Construction
The construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.
Color treatment
The color pre-treated parts of the building kit are treated with premium paint. This protects wood from blue stain and UV damage, as well as from swelling and fading, while still allowing the wooden texture to shine through. Log planks and cornices are sprayed twice on one side at the factory. Doors and windows are coated on one side, roof covers twice all-round. The inside of log planks, doors and windows is untreated. The cut edges of log planks, floors, roof boarding and beams are also left untreated. Every building kit includes enough touch-up paint or varnish to repair damage and cover screws and cut surfaces at least two times. All untreated building kit parts used in outside areas (e.g. protruding undersides of roofs, roof beams, the underside of floors and the inside face of windows and doors) are unprotected and must be treated with primer and two coats of varnish/paint by customers. If you wish to further enhance the surface, lightly sand the visible surfaces and coat them with premium varnish after assembly. Use our optional paint and varnish products. Actual colors may deviate from the color samples illustrated.
Walls
All 28 mm-thick wall logs have a single groove and tongue milling. The logs are inserted into one another and slotted and screwed into the corner post.
Roofing
The roof consists of 19 mm roof boarding. Roofing with shingles is not possible due to the low roof pitch. We recommend roofing with KSK-M roofing membrane (optionally available). The slope runs toward the rear.
Flooring
The floor consists of untreated 19 mm floorboards with tongue and groove, including impregnated ground supports.
- high-quality Nordic spruce
- including 3-part glass sliding door
- 28 mm wall logs
- floor 19 mm
- Plug-screw corner connection
