SKAN HOLZ Gazebo Versailles
- 6-corner gazebo Ø 418 cm
- solid structure of high quality glued laminate (BSH spruce)
- colour-treated in slate grey
- posts 12 x 12 cm including mounting brackets
- swept roof structure
- tongued post-purlin connections
- gekervte rafters
- 28 mm roof boarding
- Shingles optionally available
Construction
The construction is made of glued laminate timber, consisting of several dried layers, attached to one another with finger-jointing. They are glued onto one another for weather-resistance. This results in a load-bearing beam which is more resistant to warping and less prone to fissures than naturally grown wood.
Color treatment
The color pre-treated parts of the building kit are treated with premium varnish and paint. This protects wood from blue stain and UV damage, as well as from swelling and fading, while still allowing the wooden texture to shine through. At the factory, parts are flow-coated twice on all sides with varnish and the excess subsequently brushed off.
You can begin with assembly immediately upon delivery, there is no need for cumbersome priming and painting. Every building kit includes enough touch-up paint or varnish to repair damage and cover screws and cut surfaces at least two times.
If you wish to further enhance the surface, lightly sand the visible surfaces and coat them with premium varnish or paint after assembly. Traces of storage on all-round color-treated components are due to technical reasons.
Roofing
The roof consists of 19 mm roof boarding. Roofing with shingles is not possible due to the low roof pitch. We recommend roofing with KSK-M roofing membrane (optionally available). The slope runs toward the rear.
Bracing
The building kit contains mounting brackets of galvanized flat steel including anchor bolts for attachment to the site-built foundation. They ensure secure connection to the subsurface.
- Solid structure of glued laminate (BSH spruce)
- Colour-treated in slate grey
- posts 12 x 12 cm
- Including mounting brackets
- 28 mm roof boarding
