Gazebo Versailles, glulam, pre-treated light oak

€5,065.00*

Color
Size
Product number: 371396-01-31
Premium quality for your garden
*Manufacturer's recommended retail price. Delivery in Germany free kerbside / Austria free DIY store. Please note that an order can only be placed via our dealers. Assembly instructions Data sheet

SKAN HOLZ Gazebo Versailles


  • 6-corner gazebo Ø 418 cm

  • solid structure of high quality glued laminate (BSH spruce)

  • colour-treated in light oak

  • posts 12 x 12 cm including mounting brackets

  • swept roof structure

  • tongued post-purlin connections

  • gekervte rafters

  • 28 mm roof boarding

  • Shingles optionally available




Construction

The construction is made of glued laminate timber, consisting of several dried layers, attached to one another with finger-jointing. They are glued onto one another for weather-resistance. This results in a load-bearing beam which is more resistant to warping and less prone to fissures than naturally grown wood.


Color treatment

The color pre-treated parts of the building kit are treated with premium varnish and paint. This protects wood from blue stain and UV damage, as well as from swelling and fading, while still allowing the wooden texture to shine through. At the factory, parts are flow-coated twice on all sides with varnish and the excess subsequently brushed off.

You can begin with assembly immediately upon delivery, there is no need for cumbersome priming and painting. Every building kit includes enough touch-up paint or varnish to repair damage and cover screws and cut surfaces at least two times.

If you wish to further enhance the surface, lightly sand the visible surfaces and coat them with premium varnish or paint after assembly. Traces of storage on all-round color-treated components are due to technical reasons.


Roofing

The roof consists of 19 mm roof boarding. Roofing with shingles is not possible due to the low roof pitch. We recommend roofing with KSK-M roofing membrane (optionally available). The slope runs toward the rear.


Bracing

The building kit contains mounting brackets of galvanized flat steel including anchor bolts for attachment to the site-built foundation. They ensure secure connection to the subsurface.


  • Solid structure of glued laminate (BSH spruce)

  • Colour-treated in light oak

  • posts 12 x 12 cm

  • Including mounting brackets

  • 28 mm roof boarding

Material: Glulam, spruce
Color: Light oak
Color treatment: Stained
Size: Ø 418 cm
Basic width: 333 cm
Basic length: 288 cm
Total width: 418 cm
Total length: 360 cm
Roof ridge height: 332 cm
Roof eave height: 221 cm
Total height (front): 221 cm
Total height (behind): 221 cm
Roof shape: Tent roof
Material roof covering: Roof boards
Roof thickness: 28 mm
Roof surface: 15 m²
Roof slope: to the side
Roof overhang (front): 36 cm
Roof overhang (behind): 36 cm
roof overhang (left): 36 cm
roof overhang (right): 36 cm
Shingles required á 2m²: 12 package(s)
Base surface: 11.23 m²
Building volume: 31.05 m³
Passage height (front): 215 cm
Passage height (behind): 215 cm
Thickness of posts: 12 x 12 cm
Post length: 215.8 cm
Post spacing (width): 150 cm
Post spacing (depth): 150 cm
Number of posts: 6 Stück
Anchoring: Mounting brackets
Snow load: 0.75 kN/m²
Wind pressure: 0.65 kN/m²
Surface wood: 64.07 m²
Type of installation: Free standing
Mounting material: Included
delivery time: 6 weeks
Number of packages: 1
package weight 1: 614 kg
packaging width 1: 260 cm
packaging height 1: 65 cm
packaging length 1: 120 cm
Total weight: 614 kg
Not inclusiv: Cement
Garantie: 5 years according to our warranty conditions
delivery Note: Road that must support a 38t truck (Germany, mainland)

Accessories

Shingles, black ( 2m² per packet )
Roof shingles for peaked roofs. These can be laid directly on the boarding or roofing felt and provide long-term protection against the elements. Please refer to the instructions of each product for the number of packages needed.Shingles, black2m² per packet2 m²

€55.00*
Shingles, red ( 2m² per packet )
Roof shingles for peaked roofs. These can be laid directly on the boarding or roofing felt and provide long-term protection against the elements. Please refer to the instructions of each product for the number of packages needed.Shingles, red2m² per packet

€55.00*
Balustrade balcony siding 150 x 96 cm, Nancy 2/Versailles, colour pre-treated in light oak
The decorative SKAN HOLZ balustrade of balcony siding is suited to the SKAN HOLZ gazebo Nancy 2 / Versailles 2Product featuresWidth: 150 cmHeight: 96 cmthickness cross-bar: 6 x 6 cmthickness balcony board: 1,9 x 12 cmMaterial: nordic sprucecolour-treated in light oakPhoto galleryAny illustrated gazebos, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Color treatment The color pre-treated parts of the building kit are treated with premium varnish and paint. This protects wood from blue stain and UV damage, as well as from swelling and fading, while still allowing the wooden texture to shine through. At the factory, parts are flow-coated twice on all sides with varnish and the excess subsequently brushed off.You can begin with assembly immediately upon delivery, there is no need for cumbersome priming and painting. Every building kit includes enough touch-up paint or varnish to repair damage and cover screws and cut surfaces at least two times.If you wish to further enhance the surface, lightly sand the visible surfaces and coat them with premium varnish or paint after assembly. Traces of storage on all-round color-treated components are due to technical reasons.Balustrade balcony sidingSuitable for post spacing of 150 cmNordic spruceColour-treated in light oak

€225.00*
Balustrade St.Andrew`s cross 150 x 84 cm, Nancy 2/Versailles, colour pre-treated in light oak
The decorative SKAN HOLZ balustrade with solid St. Andrew's crosses of solid structural timber is suited to the SKAN HOLZ gazebo Nancy 2 / Versailles 2.Product featuresWidth: 150 cmHeight: 84 cm (+arbitrary distance form floor)thickness cross beams: 10 x 10 cmthickness St. Andrew`s cross: 8 x 8 cmMaterial: sprucecolour-treated in light oakPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of KVH solid construction timber. KVH is a designation for technically-dried, continuously bonded, solid spruce wood. The individual wood parts are dried, scanned for flaws, sorted and then weatherproofed by continuous bonding using finger-jointing. Fissures, branches and slight twists reflect the character of the materials used.Color treatment The color pre-treated parts of the building kit are treated with premium varnish and paint. This protects wood from blue stain and UV damage, as well as from swelling and fading, while still allowing the wooden texture to shine through. At the factory, parts are flow-coated twice on all sides with varnish and the excess subsequently brushed off.You can begin with assembly immediately upon delivery, there is no need for cumbersome priming and painting. Every building kit includes enough touch-up paint or varnish to repair damage and cover screws and cut surfaces at least two times.If you wish to further enhance the surface, lightly sand the visible surfaces and coat them with premium varnish or paint after assembly. Traces of storage on all-round color-treated components are due to technical reasons.Balustrade St.Andrew`s crossSuitable for post spacing of 150 cmNordic spruceColour-treated in light oak

€365.00*