Friesland Carport Set 8, 557 x 555 cm

€3,979.00*

Color
Size
Product number: 314348-99-50
Premium quality for your garden
*Manufacturer's recommended retail price. Delivery in Germany free kerbside / Austria free DIY store. Please note that an order can only be placed via our dealers. Assembly instructions Data sheet

SKAN HOLZ Carport Friesland Set 8


  • Flat-roof carport

  • Exterior dimensions 557 x 555 cm

  • with 2 entrance arches

  • Structure of impregnated softwood

  • Green impregnated

  • posts 11,5 x 11,5 cm including H-post anchor

  • Aluminium roof panels (blank)

  • Roof edging of wood-moulded facing with aluminium end edge




Construction

The construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.


Color treatment

Water-based impregnation protects the wooden components of this building kit from fungus and insect infestations. The building kit can be assembled immediately upon delivery. The wooden surface should be further treated no sooner than 2-3 sunny months later, after the excess impregnation has dried. Lightly sand and clean the surface prior to coating. Apply two coats of premium wood varnish to the surface. Look for good UV protection of the products and follow the guidelines of the varnish manufacturer. Calculate service intervals of about 4-5 years, prior to the appearance of visible damage. Follow the processing guidelines of the varnish manufacturer.


Roofing

Roofing consists of aluminium roof panels with trapezoidal profile, bare. Unbreakable and hail-resistant. High noise development during precipitation. Formation of condensation possible during temperature fluctuations. High form stability at high surface temperatures.


Bracing

The building kit includes 60 cm-long H-post anchors of galvanized flat steel for embedding in concrete in the site-built deep foundation (for size and lay-out see assembly instructions). They firmly connect the posts to the subsurface to ensure high stability.


  • Flat-roof carport

  • Structure of impregnated softwood

  • Green impregnated

  • Aluminium roof panels

  • Posts 11,5 x 11,5 cm

Material: Softwood
Color: Green
Color treatment: impregnated
Size: 557 x 555 cm
Basic width: 537 cm
Basic length: 469 cm
Total width: 557 cm
Total length: 555 cm
Roof ridge height: 254 cm
Roof eave height: 243 cm
Total height (front): 254 cm
Total height (behind): 243 cm
Roof shape: Flat roof
Material roof covering: Aluminium roof panels with trapezoidal profile
Color roofing: Aluminum
Roof thickness: 0,5 mm
Roof surface: 30.91 m²
Roof edging: Wooden profile fascia with alu edges
Roof slope: backwards
Slope: 1.5 °
Roof overhang (front): 210 cm
Roof overhang (behind): 15 cm
roof overhang (left): 10 cm
roof overhang (right): 10 cm
Base surface: 30.91 m²
Building volume: 76.82 m³
Passage width: 514 cm
Passage height (front): 212 cm
Passage height (behind): 201 cm
Thickness of posts: 11,5 x 11,5 cm
Post length: 220 cm
Post spacing (width): 514 cm
Post spacing (depth): 141 cm
Number of posts: 6
Anchoring: Post anchors
Snow load: 1.25 kN/m²
Wind pressure: 0.95 kN/m²
Surface wood: 62.52 m²
Type of installation: Free standing
Mounting material: Included
delivery time: 4 weeks
Number of packages: 1
package weight 1: 390 kg
packaging width 1: 550 cm
packaging height 1: 40 cm
packaging length 1: 120 cm
Total weight: 390 kg
Included in delivery: H-post anchors, mounting material, assembly instructions
Not inclusiv: Cement
Garantie: 5 years according to our warranty conditions
delivery Note: Road that must support a 38t truck (Germany, mainland)

Accessories

Guttering set 600cm, PVC, brown
Weather-resistant brown resin gutter set.Length: 600 cmColour: browndiameter gutter 100 mmdiameter downpipe 75 mmconsisting of :gutter(s)downpipedownpipe bendconnection elementspipe clampsgutter end piecesgutter bracketsscrews for gutter bracketsSimple inserting and clamping of parts.PVC gutter set, brown600cmDiameter downpipe 75 mm

€249.00*
Sidewall in profiled siding material 141 x 200 cm, softwood, green impregnated
Sidewall of profiled siding material for installation under a SKAN HOLZ carportProfiled siding consists of loose tongued and grooved timber in 20 mm thickness, which is attached to one another and mounted between the posts.Product featuresWidth: 141 cmHeight: 200 cmThickness: 20 mmMaterial: spruceGreen impregnatedConstructionThe construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.Color treatmentWater-based impregnation protects the wooden components of this building kit from fungus and insect infestations. The building kit can be assembled immediately upon delivery. The wooden surface should be further treated no sooner than 2-3 sunny months later, after the excess impregnation has dried. Lightly sand and clean the surface prior to coating. Apply two coats of premium wood varnish to the surface. Look for good UV protection of the products and follow the guidelines of the varnish manufacturer. Calculate service intervals of about 4-5 years, prior to the appearance of visible damage. Follow the processing guidelines of the varnish manufacturer.Sidewall in profiled siding materialSuitable for post spacing of 141 cmProfiled siding materialGreen impregnated

€185.00*
Backwall in profiled siding material 550 x 200 cm, softwood, green impregnated
Backwall of profiled siding material for installation under a SKAN HOLZ carportProfiled siding consists of loose tongued and grooved timber in 20 mm thickness, which is attached to one another and mounted between the posts.Product featuresWidth: 550 cmHeight: 200 cmThickness: 20 mmincluding post 9 x 9 cmincluding H-post anchorMaterial: spruceGreen impregnatedConstructionThe construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.Color treatmentWater-based impregnation protects the wooden components of this building kit from fungus and insect infestations. The building kit can be assembled immediately upon delivery. The wooden surface should be further treated no sooner than 2-3 sunny months later, after the excess impregnation has dried. Lightly sand and clean the surface prior to coating. Apply two coats of premium wood varnish to the surface. Look for good UV protection of the products and follow the guidelines of the varnish manufacturer. Calculate service intervals of about 4-5 years, prior to the appearance of visible damage. Follow the processing guidelines of the varnish manufacturer.Backwall in profiled siding materialSuitable for post spacing of 550 cmProfiled siding materialGreen impregnated

€725.00*