SKAN HOLZ Emsland carport
- Flat-roof carport
- Exterior dimensions 609 x 846 cm
- solid structure of high quality glued laminated timber (BSH spruce)
- colour-treated in slate grey
- Posts 12 x 12 cm incl. H-post anchors
- Roof covering made of galvanised steel trapezoidal sheet, anthracite-coloured polyester-coated and equipped with an anti-condensation fleece
- Wooden facing with aluminium end edge
- Including rain gutter with downpipe made of anthracite-coated steel
Construction
The construction is made of glued laminate timber, consisting of several dried layers, attached to one another with finger-jointing. They are glued onto one another for weather-resistance. This results in a load-bearing beam which is more resistant to warping and less prone to fissures than naturally grown wood.
Color treatment
The color pre-treated parts of the building kit are treated with premium varnish and paint. This protects wood from blue stain and UV damage, as well as from swelling and fading, while still allowing the wooden texture to shine through. At the factory, parts are flow-coated twice on all sides with varnish and the excess subsequently brushed off.
You can begin with assembly immediately upon delivery, there is no need for cumbersome priming and painting. Every building kit includes enough touch-up paint or varnish to repair damage and cover screws and cut surfaces at least two times.
If you wish to further enhance the surface, lightly sand the visible surfaces and coat them with premium varnish or paint after assembly. Traces of storage on all-round color-treated components are due to technical reasons.
Steel roof covering with anti-condensation coating
The roof cladding is made of galvanised trapezoidal sheet steel. The upper side is polyester-coated in elegant anthracite and not only ensures a modern appearance, but also effectively protects the material from the effects of the weather. The underside is primed and provided with anti-condensation fleece. The coating absorbs moisture from the underside of the metal, preventing it from dripping and also reducing the noise generated by rain and hail.
Thanks to its low thermal expansion, the trapezoidal steel sheet is particularly stable and minimises the risk of deformation, even in the event of extreme temperature fluctuations. The robust design guarantees very high resistance to harsh weather conditions.
Rain gutter
The scope of delivery includes a rain gutter made of galvanised and anthracite-coloured coated metal. The gutter is attached to the carport with sternboard brackets. The gutters are joined together using clamp connectors and the ends are sealed with caps for clamping. Pipes and bends are simply inserted into each other. If gutters or pipes need to be shortened on site, please use a hand saw suitable for steel, not an angle grinder. This will also protect the cut edge from rust.
Would you like a white gutter instead of an anthracite one? No problem. Please make a note of this in your order.
Bracing
The building kit includes 60 cm-long H-post anchors of galvanized flat steel for embedding in concrete in the site-built deep foundation (for size and lay-out see assembly instructions). They firmly connect the posts to the subsurface to ensure high stability.
- Flat-roof carport
- Solid structure of high quality glued laminated timber (BSH spruce)
- Colour-treated in slate grey
- Steel roof panels with anti-condensation fleece
- Posts 12 x 12 cm
