SKAN HOLZ Emsland carport
The Emsland 402 x 846 cm carport combines a robust structure in a classic design with high-quality roofing and is the ideal solution for protecting vehicles, motorbikes or as a covered parking area. With a comfortable entry height of 350 cm, it is ideal for motorhomes, caravans or large vehicles. The stable structure made of glued laminated timber (glued laminated timber) from Nordic spruce ensures high dimensional stability and low cracking. The anthracite factory treatment preserves the natural appearance of the wood and protects against UV and moisture damage.
- Solid structure: Glued laminated timber beams ensure durability and high load-bearing capacity.
- Weather protection: Surfaces flooded with glaze twice on all sides at the factory reduce swelling and shrinkage behaviour; repair glaze for cut and assembly surfaces included.
- Exterior dimensions 402 x 846 cm
- Posts 12 x 12 cm: Robust posts including H-post anchors for secure anchoring in the foundation.
- Roof covering made of galvanised steel trapezoidal sheet: Polyester-coated in anthracite, with anti-condensation fleece on the underside to reduce dripping and impact noise.
- Wooden facing with aluminium end edge: Aesthetic detail and additional protection for the end edges.
- Including rain gutter with downpipe: Galvanised, anthracite-coated metal, installation accessories included; also available in white on request.
- Post anchoring: Including 60 cm H-post anchor made of galvanised flat steel for setting in concrete in point foundations to be created on site.
The kit is pre-treated at the factory so that you can start assembly immediately after delivery. An enclosed repair quantity of glaze enables the professional post-treatment of drilling and cutting points. For additional finishing, we recommend light sanding and a coat of high-quality glaze after installation.
Technical advantages of the roof covering:
- Corrosion protection: Galvanised trapezoidal sheet metal with polyester coating offers long-lasting protection against the weather.
- Anti-condensation fleece: Prevents dripping and reduces noise during precipitation.
- Low thermal expansion: Minimises the risk of deformation in the event of temperature fluctuations.
Installation and service: The kit is supplied including all necessary fixings and H-anchors. We will be happy to provide you with a suitable foundation plan on request - please specify when ordering. Please follow the assembly instructions for the dimensions of the point foundation and the correct installation of the rain gutter (use a suitable hand saw when shortening to avoid rust forming on the cut edges).
The Emsland carport is a durable, flexible and visually appealing solution for outdoor use. Thanks to the combination of high-quality glued laminated timber, corrosion-protected roof covering and practical features, you get a product that is highly durable and easy to maintain and assemble.
Construction
The construction is made of glued laminate timber, consisting of several dried layers, attached to one another with finger-jointing. They are glued onto one another for weather-resistance. This results in a load-bearing beam which is more resistant to warping and less prone to fissures than naturally grown wood.
Color treatment
The color pre-treated parts of the building kit are treated with premium varnish and paint. This protects wood from blue stain and UV damage, as well as from swelling and fading, while still allowing the wooden texture to shine through. At the factory, parts are flow-coated twice on all sides with varnish and the excess subsequently brushed off.
You can begin with assembly immediately upon delivery, there is no need for cumbersome priming and painting. Every building kit includes enough touch-up paint or varnish to repair damage and cover screws and cut surfaces at least two times.
If you wish to further enhance the surface, lightly sand the visible surfaces and coat them with premium varnish or paint after assembly. Traces of storage on all-round color-treated components are due to technical reasons.
Steel roof covering with anti-condensation coating
The roof cladding is made of galvanised trapezoidal sheet steel. The upper side is polyester-coated in elegant anthracite and not only ensures a modern appearance, but also effectively protects the material from the effects of the weather. The underside is primed and provided with anti-condensation fleece. The coating absorbs moisture from the underside of the metal, preventing it from dripping and also reducing the noise generated by rain and hail.
Thanks to its low thermal expansion, the trapezoidal steel sheet is particularly stable and minimises the risk of deformation, even in the event of extreme temperature fluctuations. The robust design guarantees very high resistance to harsh weather conditions.
Rain gutter
The scope of delivery includes a rain gutter made of galvanised and anthracite-coloured coated metal. The gutter is attached to the carport with sternboard brackets. The gutters are joined together using clamp connectors and the ends are sealed with caps for clamping. Pipes and bends are simply inserted into each other. If gutters or pipes need to be shortened on site, please use a hand saw suitable for steel, not an angle grinder. This will also protect the cut edge from rust.
Would you like a white gutter instead of an anthracite one? No problem. Please make a note of this in your order.
Bracing
The building kit includes 60 cm-long H-post anchors of galvanized flat steel for embedding in concrete in the site-built deep foundation (for size and lay-out see assembly instructions). They firmly connect the posts to the subsurface to ensure high stability.
- Flat-roof carport
- Solid structure of high quality glued laminated timber (BSH spruce)
- Rain gutter with downpipe
- Steel roof panels with anti-condensation fleece
- Posts 12 x 12 cm
