Carport Wendland 409 x 628 cm with aluminium roof, black fascia

Premium quality for your garden

*Manufacturer's recommended retail price. Delivery in Germany free kerbside / Austria free DIY store. Please note that an order can only be placed via our dealers. Assembly instructions Data sheet

SKAN HOLZ Carport Wendland

Flat-roof carport

Exterior dimensions 409 x 628 cm

solid structure of high quality glued laminate (BSH spruce)

not colour-treated

posts 12 x 12 cm including H-post anchor

Aluminium roof panels, coated in anthracite paint

circular black facing in slate look with aluminium end edge

including rain gutter with downpipe made of anthracite-coated steel

Construction

The construction is made of glued laminate timber, consisting of several dried layers, attached to one another with finger-jointing. They are glued onto one another for weather-resistance. This results in a load-bearing beam which is more resistant to warping and less prone to fissures than naturally grown wood.

Color treatment

This building kit is not treated with color. Wood in outdoor areas is constantly exposed to the elements, such as fungus and insect infestations. Regular application of protective coatings is thus essential. Primer should be applied to all sides prior to assembly. First apply wood primer to protect against fungus and insects.
Then apply an intermediate and a finishing coat of premium wood varnish or paint to protect against color change and damage. Calculate service intervals of about 4-5 years, prior to the appearance of visible damage. Follow the processing guidelines of the varnish manufacturer.

Roofing

Roofing consists of aluminium roof panels with trapezoidal profile, paint-coated (top face anthracite/underside light grey). Unbreakable and hail-resistant. High noise development during precipitation. Formation of condensation possible during temperature fluctuations. High form stability at high surface temperatures.

Rain gutter

The scope of delivery includes a rain gutter made of galvanised and anthracite-coloured coated metal. The gutter is attached to the carport with sternboard brackets. The gutters are joined together using clamp connectors and the ends are sealed with caps for clamping. Pipes and bends are simply inserted into each other. If gutters or pipes need to be shortened on site, please use a hand saw suitable for steel, not an angle grinder. This will also protect the cut edge from rust.

Would you like a white gutter instead of an anthracite one? No problem. Please make a note of this in your order.

Bracing

The building kit includes 60 cm-long H-post anchors of galvanized flat steel for embedding in concrete in the site-built deep foundation (for size and lay-out see assembly instructions). They firmly connect the posts to the subsurface to ensure high stability.

Flat-roof carport

Solid structure of glued laminate (BSH spruce)

not Colour-treated

Aluminium roof panels

Posts 12 x 12 cm

Material:	Glulam, spruce
Color:	Natural
Color treatment:	Untreated
Size:	409 x 628 cm
Basic width:	365 cm
Basic length:	496 cm
Total width:	409 cm
Total length:	628 cm
Roof ridge height:	247 cm
Roof eave height:	235 cm
Total height (front):	247 cm
Total height (behind):	235 cm
Roof shape:	Flat roof
Material roof covering:	Aluminium roof panels with trapezoidal profile
Color roofing:	Anthracite
Roof thickness:	0,5 mm
Roof surface:	21.79 m²
Roof edging:	Circumferential fascia with alu edges
Roof slope:	backwards
Slope:	1.2 °
Roof overhang (front):	94 cm
Roof overhang (behind):	38 cm
roof overhang (left):	22 cm
roof overhang (right):	22 cm
Base surface:	25.69 m²
Building volume:	61.9 m³
Passage width:	341 cm
Passage height (front):	210 cm
Passage height (behind):	198 cm
Thickness of posts:	12 x 12 cm
Post length:	220 cm
Post spacing (width):	341 cm
Post spacing (depth):	230 cm
Number of posts:	6 Stück
Anchoring:	Post anchors
Snow load:	1.25 kN/m²
Wind pressure:	0.95 kN/m²
Surface wood:	53.17 m²
Type of installation:	Free standing
Mounting material:	Included
delivery time:	4 Wochen
Number of packages:	1
package weight 1:	640 kg
packaging width 1:	380 cm
packaging height 1:	65 cm
packaging length 1:	120 cm
Total weight:	640 kg
Included in delivery:	H-post anchors, mounting material, assembly instructions
Not inclusiv:	Cement
Garantie:	5 years according to our warranty conditions
delivery Note:	Road that must support a 38t truck (Germany, mainland)

Accessories

Produktbild: Seitenwand aus Deckelschalung 230 x 180 cm

Sidewall for glulam carports 230 x 180 cm, spruce, untreated

Siding for installation in a SKAN HOLZ CarportSiding consists of loose boarding in 20 mm thickness, and is not installed until the carport has been completely erected. It provides for increased stability, privacy shield from the side, and protection from wind and overgrown hedges.Product featuresWidth: 230 cmHeight: 180 cmthickness siding: 2 x 12 cmMaterial: nordic sprucenot colour-treatedPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Color treatmentThis building kit is not treated with color. Wood in outdoor areas is constantly exposed to the elements, such as fungus and insect infestations. Regular application of protective coatings is thus essential. Primer should be applied to all sides prior to assembly. First apply wood primer to protect against fungus and insects. Then apply an intermediate and a finishing coat of premium wood varnish or paint to protect against color change and damage. Calculate service intervals of about 4-5 years, prior to the appearance of visible damage. Follow the processing guidelines of the varnish manufacturer.Sidewall, nordic sprucePanels with vertical slatsSuitable for post spacing of 230 cmnot Colour-treated

€405.00*

Details

Produktbild: Seitenwand aus Deckelschalung 230 x 220 cm

Sidewall for glulam carports 230 x 220 cm, spruce, untreated

Siding for installation in a SKAN HOLZ CarportSiding consists of loose boarding in 20 mm thickness, and is not installed until the carport has been completely erected. It provides for increased stability, privacy shield from the side, and protection from wind and overgrown hedges.Product featuresWidth: 230 cmHeight: 220 cmthickness siding: 2 x 12 cmMaterial: nordic sprucenot colour-treatedPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Color treatmentThis building kit is not treated with color. Wood in outdoor areas is constantly exposed to the elements, such as fungus and insect infestations. Regular application of protective coatings is thus essential. Primer should be applied to all sides prior to assembly. First apply wood primer to protect against fungus and insects. Then apply an intermediate and a finishing coat of premium wood varnish or paint to protect against color change and damage. Calculate service intervals of about 4-5 years, prior to the appearance of visible damage. Follow the processing guidelines of the varnish manufacturer.Sidewall, nordic sprucePanels with vertical slatsSuitable for post spacing of 230 cmnot Colour-treated

€469.00*

Details

Produktbild: Rückwand aus Deckelschalung 341 x 180 cm

Rear wall siding 352 x 180 cm, spruce, natural

Rear wall made of siding for installation in a SKAN HOLZ carportSiding consists of two layers of loose 20 mm thick formwork boards, which are only attached once the carport is completely assembled. It provides increased stability, privacy from the side and protection from e.g. wind or overgrown hedges.Product featuresWidth: 352 cmHeight: 180 cmFormwork thickness: 2 x 12 cmH-post anchor includedMaterial: Nordic spruceUntreated in colourPhoto galleryAny carports, colour treatment and decoration shown are not included in the scope of delivery. These are customer photos, which are intended to give you an impression of the installed state.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Color treatmentThis building kit is not treated with color. Wood in outdoor areas is constantly exposed to the elements, such as fungus and insect infestations. Regular application of protective coatings is thus essential. Primer should be applied to all sides prior to assembly. First apply wood primer to protect against fungus and insects. Then apply an intermediate and a finishing coat of premium wood varnish or paint to protect against color change and damage. Calculate service intervals of about 4-5 years, prior to the appearance of visible damage. Follow the processing guidelines of the varnish manufacturer.incl. installation post and post anchor352 x 180 cmSpruce, untreatedincl. installation post with post anchor

€705.00*

Details

Post extension 12x12cm in running meters, glulam, untreated

Do you need longer posts?Order the post extension for your terrace roof or carport of glued laminate. The posts in the building kits are then replaced with longer posts.Product featuresThickness: 12 x 12 cmMaterial: glulam, sprucenot colour-treatedAttention: the surcharge applies per post, and they can only be ordered directly with the carport/terrace roof.Post extension 12x12cm in running meters12 x 12 cmGlued laminatenot Colour-treated

€40.00*

Details

Produktbild: Rückwand aus Deckelschalung 341 x 220 cm

Rear wall siding 352 x 220 cm, spruce, natural

Rear wall made of siding for installation in a SKAN HOLZ carportSiding consists of two layers of loose 20 mm thick formwork boards, which are only attached once the carport is fully assembled. It provides increased stability, privacy from the side and protection from e.g. wind or overgrown hedges.Product featuresWidth: 352 cmHeight: 220 cmFormwork thickness: 2 x 12 cmH-post anchor includedMaterial: Nordic spruceUntreated in colourPhoto galleryAny carports, colour treatment and decoration shown are not included in the scope of delivery. These are customer photos, which are intended to give you an impression of the installed state.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Color treatmentThis building kit is not treated with color. Wood in outdoor areas is constantly exposed to the elements, such as fungus and insect infestations. Regular application of protective coatings is thus essential. Primer should be applied to all sides prior to assembly. First apply wood primer to protect against fungus and insects. Then apply an intermediate and a finishing coat of premium wood varnish or paint to protect against color change and damage. Calculate service intervals of about 4-5 years, prior to the appearance of visible damage. Follow the processing guidelines of the varnish manufacturer.incl. installation post and post anchor352 x 220 cmSpruce, untreatedincl. installation post with post anchor

€769.00*

Details

Entrance arch 11,5x12cm , glulam, untreated

Comfortable entry and exit of carport by mounting one or two round arches. The first post is eliminated by mounting the round arch.Product featuresThickness: 11,5 x 12 cmMaterial: glulam, sprucenot colour-treatedcan be mounted left or rightfor carports with an entrance height of 220 cmFor static reasons, cannot be mounted on saddle-roof carports, increased snow load, and post extensions.Entrance arch 11,5x12cmGlued laminatenot Colour-treated

€519.00*

Details

Bildliche Verdeutlichung der Schneelasterhöhung beim Flachdachcarport

Snow load for single carport, wide, depth up to 604 cm, natural

The SKAN HOLZ snow load extension consists of additional rafters that you mount between the existing roof rafters. This reduces the rafter spacing of the carport and increases the overall load-bearing capacity. The number and size of the rafters varies depending on the carport.The snow load increase raises the snow load of the carport to 2.5 kN/m².This snow load extension contains 4 additional rafters and is suitable for the following models:Emsland carport 402 (404) x 604 cmWendland carport 409 x 628 cmUntreated in colourPlease note:The snow load cannot be retrofitted to the carports. Please check the snow load limit required in your residential area before assembly.ConstructionThe construction is made of glued laminate timber, consisting of several dried layers, attached to one another with finger-jointing. They are glued onto one another for weather-resistance. This results in a load-bearing beam which is more resistant to warping and less prone to fissures than naturally grown wood.Color treatmentThis building kit is not treated with color. Wood in outdoor areas is constantly exposed to the elements, such as fungus and insect infestations. Regular application of protective coatings is thus essential. Primer should be applied to all sides prior to assembly. First apply wood primer to protect against fungus and insects. Then apply an intermediate and a finishing coat of premium wood varnish or paint to protect against color change and damage. Calculate service intervals of about 4-5 years, prior to the appearance of visible damage. Follow the processing guidelines of the varnish manufacturer.Snow load increase to sk=2.50 kN/m²Glued laminated timber, untreated in colourSuitable for Emsland carport 402 (404) x 604 cmSuitable for Wendland carport 409 x 628 cm

€585.00*

Details

Sidewall for caport Spessart 230 x 160 cm, untreated

Sidewall Rhombus for installation in SKAN HOLZ carportThe walls consist of Rhombus sectional strips, loosely supplied, which are screwed between the posts.Product featuresWidth: 230 cmHeight: 160 cmthickness battens: 2,8 x 5,6 cmMaterial: nordic sprucenot colour-treatedPhoto galleryAny illustrated terrace roofs, colour treatment and decoration are not included in scope of supply. This involves customer photos, which are to provide you with an impression of the installed condition.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Color treatmentThis building kit is not treated with color. Wood in outdoor areas is constantly exposed to the elements, such as fungus and insect infestations. Regular application of protective coatings is thus essential. Primer should be applied to all sides prior to assembly. First apply wood primer to protect against fungus and insects. Then apply an intermediate and a finishing coat of premium wood varnish or paint to protect against color change and damage. Calculate service intervals of about 4-5 years, prior to the appearance of visible damage. Follow the processing guidelines of the varnish manufacturer.Sidewall RhombusSuitable for post spacing of 230 cmNordic sprucenot Colour-treated

€385.00*

Details

Carport Wendland 409 x 628 cm with aluminium roof, black fascia

Premium quality for your garden

We are here for you!