Carport Spreewald 585 x 589 cm with aluminium roof, red fascia

€4,735.00*

Prices incl. VAT plus shipping costs

Color

Green

Walnut

Size

585 x 893 cm

585 x 589 cm

585 x 741 cm

Material roof covering

Aluminium roof panels with trapezoidal profile

Roof boards with EPDM rubber roofing

Product number: 313563

Premium quality for your garden

*Manufacturer's recommended retail price. Delivery in Germany free kerbside / Austria free DIY store. Please note that an order can only be placed via our dealers. Assembly instructions Data sheet

SKAN HOLZ Carport Spreewald

Flat-roof carport

Exterior dimensions 585 x 589 cm

Structure of impregnated softwood

Green impregnated

posts 11,5 x 11,5 cm including H-post anchor

Aluminium roof panels (blank)

circular red facing in slate look with aluminium end edge

including plastic gutter with downpipe

Construction

The construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.

Color treatment

Water-based impregnation protects the wooden components of this building kit from fungus and insect infestations. The building kit can be assembled immediately upon delivery. The wooden surface should be further treated no sooner than 2-3 sunny months later, after the excess impregnation has dried. Lightly sand and clean the surface prior to coating. Apply two coats of premium wood varnish to the surface. Look for good UV protection of the products and follow the guidelines of the varnish manufacturer. Calculate service intervals of about 4-5 years, prior to the appearance of visible damage. Follow the processing guidelines of the varnish manufacturer.

Roofing

Roofing consists of aluminium roof panels with trapezoidal profile, bare. Unbreakable and hail-resistant. High noise development during precipitation. Formation of condensation possible during temperature fluctuations. High form stability at high surface temperatures.

Bracing

The building kit includes 60 cm-long H-post anchors of galvanized flat steel for embedding in concrete in the site-built deep foundation (for size and lay-out see assembly instructions). They firmly connect the posts to the subsurface to ensure high stability.

Flat-roof carport

Structure of impregnated softwood

Green impregnated

Aluminium roof panels

Posts 11,5 x 11,5 cm

Material:	Softwood
Color:	Green
Color treatment:	impregnated
Size:	585 x 589 cm
Basic width:	553 cm
Basic length:	469 cm
Total width:	585 cm
Total length:	589 cm
Roof ridge height:	250 cm
Roof eave height:	238 cm
Total height (front):	250 cm
Total height (behind):	238 cm
Roof shape:	Flat roof
Material roof covering:	Aluminium roof panels with trapezoidal profile
Color roofing:	Aluminum
Roof thickness:	0,5 mm
Roof surface:	30.25 m²
Roof edging:	Circumferential fascia with alu edges
Roof slope:	backwards
Slope:	1.2 °
Roof overhang (front):	60 cm
Roof overhang (behind):	60 cm
roof overhang (left):	16 cm
roof overhang (right):	16 cm
Base surface:	34.46 m²
Building volume:	84.07 m³
Passage width:	530 cm
Passage height (front):	215 cm
Passage height (behind):	203 cm
Thickness of posts:	11,5 x 11,5 cm
Post length:	220 cm
Post spacing (width):	530 cm
Post spacing (depth):	141 cm
Number of posts:	8 Stück
Anchoring:	Post anchors
Snow load:	1.25 kN/m²
Wind pressure:	0.95 kN/m²
Surface wood:	61.93 m²
Type of installation:	Free standing
Mounting material:	Included
delivery time:	4 weeks
Number of packages:	1
package weight 1:	816 kg
packaging width 1:	560 cm
packaging height 1:	60 cm
packaging length 1:	120 cm
Total weight:	816 kg
Included in delivery:	H-post anchors, mounting material, assembly instructions
Not inclusiv:	Cement
Garantie:	5 years according to our warranty conditions
delivery Note:	Road that must support a 38t truck (Germany, mainland)

Accessories

Sidewall in profiled siding material 141 x 200 cm, softwood, green impregnated

Sidewall of profiled siding material for installation under a SKAN HOLZ carportProfiled siding consists of loose tongued and grooved timber in 20 mm thickness, which is attached to one another and mounted between the posts.Product featuresWidth: 141 cmHeight: 200 cmThickness: 20 mmMaterial: spruceGreen impregnatedConstructionThe construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.Color treatmentWater-based impregnation protects the wooden components of this building kit from fungus and insect infestations. The building kit can be assembled immediately upon delivery. The wooden surface should be further treated no sooner than 2-3 sunny months later, after the excess impregnation has dried. Lightly sand and clean the surface prior to coating. Apply two coats of premium wood varnish to the surface. Look for good UV protection of the products and follow the guidelines of the varnish manufacturer. Calculate service intervals of about 4-5 years, prior to the appearance of visible damage. Follow the processing guidelines of the varnish manufacturer.Sidewall in profiled siding materialSuitable for post spacing of 141 cmProfiled siding materialGreen impregnated

€185.00*

Details

Backwall in profiled siding material 550 x 200 cm, softwood, green impregnated

Backwall of profiled siding material for installation under a SKAN HOLZ carportProfiled siding consists of loose tongued and grooved timber in 20 mm thickness, which is attached to one another and mounted between the posts.Product featuresWidth: 550 cmHeight: 200 cmThickness: 20 mmincluding post 9 x 9 cmincluding H-post anchorMaterial: spruceGreen impregnatedConstructionThe construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.Color treatmentWater-based impregnation protects the wooden components of this building kit from fungus and insect infestations. The building kit can be assembled immediately upon delivery. The wooden surface should be further treated no sooner than 2-3 sunny months later, after the excess impregnation has dried. Lightly sand and clean the surface prior to coating. Apply two coats of premium wood varnish to the surface. Look for good UV protection of the products and follow the guidelines of the varnish manufacturer. Calculate service intervals of about 4-5 years, prior to the appearance of visible damage. Follow the processing guidelines of the varnish manufacturer.Backwall in profiled siding materialSuitable for post spacing of 550 cmProfiled siding materialGreen impregnated

€725.00*

Details

Replacement post for higher entrance, 11,5x11,5cm, by 20cm to length of 240cm, green impregnated

Do you need longer posts?Order the replacement posts, made of impregnated softwood, for your carport. The standard 220 cm-long posts in the building kit are then exchanged for posts of 240 cm.Product featuresLength: 240 cm (20 cm)Thickness: 11,5 x 11,5 cmGreen impregnatedAttention: the surcharge applies per post, and they can only be ordered directly with the carport.Replacement post for higher entrance11,5x11,5cm, by 20cm to length of 240cmStructure of impregnated softwoodGreen impregnated

€4.55*

Details

Replacement post for higher entrance, 11,5x11,5cm, by 80cm to length of 300cm, green impregnated

Do you need longer posts?Order the replacement posts, made of impregnated softwood, for your carport. The standard 220 cm-long posts in the building kit are then exchanged for posts of 300 cm.Product featuresLength: 300 cm (80 cm)Thickness: 11,5 x 11,5 cmGreen impregnatedAttention: the surcharge applies per post, and they can only be ordered directly with the carport.Replacement post for higher entrance11,5x11,5cm, by 80cm to length of 300cmStructure of impregnated softwoodGreen impregnated

€18.21*

Details

Entrance arch 11,5x12cm , glulam, green impregnated

Comfortable entry and exit of carport by mounting one or two round arches. The first post is eliminated by mounting the round arch.Product featuresThickness: 11,5 x 12 cmMaterial: glulam, spruceGreen impregnatedcan be mounted left or rightfor carports with an entrance height of 220 cmFor static reasons, cannot be mounted on saddle-roof carports, increased snow load, and post extensions.Entrance arch 11,5x12cmGlued laminateGreen impregnated

€505.00*

Details

Snow load 585x589cm 2,00 kN/m², green impregnated

The SKAN HOLZ increased snow-load consists of additional rafters, which are mounted between the existing roof rafters. This reduces the rafter spacing of the carport and increases load capacity. The number and size of the rafters varies according to carport.Increased snow load increases the snow load of the carport to 2,0 kN/m².This snow-load increase contains 6 additional rafters and fits the following models:Carport Spreewald 585 x 589 cmGreen impregnatedPlease be aware:Increased snow load cannot subsequently be backfitted on the carports. Before assembling, please find out what the snow-load limit is in your area.ConstructionThe construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.Color treatmentWater-based impregnation protects the wooden components of this building kit from fungus and insect infestations. The building kit can be assembled immediately upon delivery. The wooden surface should be further treated no sooner than 2-3 sunny months later, after the excess impregnation has dried. Lightly sand and clean the surface prior to coating. Apply two coats of premium wood varnish to the surface. Look for good UV protection of the products and follow the guidelines of the varnish manufacturer. Calculate service intervals of about 4-5 years, prior to the appearance of visible damage. Follow the processing guidelines of the varnish manufacturer.Snow load2,00 kN/m²Structure of impregnated softwoodGreen impregnated

€699.00*

Details

Carport Spreewald 585 x 589 cm with aluminium roof, red fascia

Premium quality for your garden

We are here for you!