SKAN HOLZ Carport Friesland Hybrid Set 14
- Flat-roof carport
- Exterior dimensions 557 x 708 cm
- with storage room WxDxH 275 x 164 x 190 cm
- Walls made of aluminum trapezoidal profiles (anthracite outside/light gray inside)
- Structure of impregnated softwood
- colour-treated in slate-grey
- posts 11,5 x 11,5 cm including H-post anchor
- Aluminium roof panels (blank)
- Roof edging of wood-moulded facing with aluminium end edge
Construction
The construction is made of impregnated softwood. Spruce and pine wood, which is not technically-dried, acquires its greenish color from metal salts released by the impregnating agent. They protect wood against fungus and insect infestations, but do not contain UV protection. Impregnation gives wood higher residual moisture. Subsequent drying can lead to release of resin, twisting and formation of drying cracks, which pose no static disadvantage and rather reflect the natural materials used.
Color treatment
The color pre-treated parts of the building kit are treated with premium varnish and paint. This protects wood from blue stain and UV damage, as well as from swelling and fading, while still allowing the wooden texture to shine through. At the factory, parts are flow-coated twice on all sides with varnish and the excess subsequently brushed off.
You can begin with assembly immediately upon delivery, there is no need for cumbersome priming and painting. Every building kit includes enough touch-up paint or varnish to repair damage and cover screws and cut surfaces at least two times.
If you wish to further enhance the surface, lightly sand the visible surfaces and coat them with premium varnish or paint after assembly. Traces of storage on all-round color-treated components are due to technical reasons.
Wall / Walls
The walls are made of aluminium panels with a trapezoidal profile, which create a modern look. They are coated in anthracite on the outside and aluminium on the inside. The panels are fastened to a wooden substructure with colour-matching sheet metal screws.
Roofing
Roofing consists of aluminium roof panels with trapezoidal profile, bare. Unbreakable and hail-resistant. High noise development during precipitation. Formation of condensation possible during temperature fluctuations. High form stability at high surface temperatures.
Bracing
The building kit includes 60 cm-long H-post anchors of galvanized flat steel for embedding in concrete in the site-built deep foundation (for size and lay-out see assembly instructions). They firmly connect the posts to the subsurface to ensure high stability.
- Flat-roof carport
- Structure of impregnated softwood
- Walls made of aluminum trapezoidal profiles
- Aluminium roof panels
- Posts 11,5 x 11,5 cm
