SKAN HOLZ Front door canopy Putbus
- Exterior dimensions 203 x 128 cm
- solid structure of high quality glued laminate (BSH spruce)
- colour-treated in white
- posts 12 x 12 cm including mounting brackets
- purlin 12nbsp;x 12 cm
- Rafter 6 x 12 cm
- gekervte rafters
- 20 mm roof boarding
- Shingles optionally available
Construction
The construction is made of glued laminate timber, consisting of several dried layers, attached to one another with finger-jointing. They are glued onto one another for weather-resistance. This results in a load-bearing beam which is more resistant to warping and less prone to fissures than naturally grown wood.
Colour treatment
The colour-treated components are coated with a layer of paint at the factory. The coating allows the natural wood grain to remain visible whilst ensuring a uniform surface finish. The components are coated on all sides twice at the factory, after which any excess material is brushed off.
Thanks to this factory pre-treatment, the components can be assembled immediately upon delivery. A primer coat prior to assembly is not required. Each kit also includes a quantity of wood stain or paint for touching up cut edges, screw holes or any damage caused during assembly. These areas should be treated in accordance with the installation instructions.
For a personalised finish, the visible wooden surfaces can be lightly sanded after assembly and treated with a suitable wood stain or paint. Components that have been colour-treated on all sides may show storage marks due to technical reasons.
Roofing
The roof is supplied with 20 mm-thick roof boarding for roofing with roof shingles (roof shingles optionally available).
Bracing
The building kit contains mounting brackets of galvanized flat steel including anchor bolts for attachment to the site-built foundation. They ensure secure connection to the subsurface.
- Solid structure of glued laminate (BSH spruce)
- Upright 12 x 12 cm
- Purlin 12 x 12 cm
- Rafter 6 x 12 cm
- 20 mm roof boarding
