Canopy Fehmarn, 200 x 125 cm, colour pre-treated slate-grey

€1,839.00*

Color
Size
Product number: 206773-13-35
Premium quality for your garden
*Manufacturer's recommended retail price. Delivery in Germany free kerbside / Austria free DIY store. Please note that an order can only be placed via our dealers. Assembly instructions Data sheet

SKAN HOLZ Front door canopy Fehmarn


  • Exterior dimensions 200 x 125 cm

  • solid structure of high quality glued laminate (BSH spruce)

  • colour-treated in slate-grey

  • posts 12 x 12 cm including mounting brackets

  • purlin 12nbsp;x 12 cm

  • Rafter 6 x 12 cm

  • Roofing of 19 mm-thick roof boarding with EPDM foil

  • Roof drainage via roof gully and downpipe

  • Supplied without wall-attachment material


Construction


The construction is made of glued laminate timber, consisting of several dried layers, attached to one another with finger-jointing. They are glued onto one another for weather-resistance. This results in a load-bearing beam which is more resistant to warping and less prone to fissures than naturally grown wood.


Color treatment


The color pre-treated parts of the building kit are treated with premium varnish and paint. This protects wood from blue stain and UV damage, as well as from swelling and fading, while still allowing the wooden texture to shine through. At the factory, parts are flow-coated twice on all sides with varnish and the excess subsequently brushed off.


You can begin with assembly immediately upon delivery, there is no need for cumbersome priming and painting. Every building kit includes enough touch-up paint or varnish to repair damage and cover screws and cut surfaces at least two times.


If you wish to further enhance the surface, lightly sand the visible surfaces and coat them with premium varnish or paint after assembly. Traces of storage on all-round color-treated components are due to technical reasons.


Roofing


Roofing consists of 19 mm-thick roof boarding with EPDM foil. EPDM foil is easy to lay, safe and durable roofing for roofs with low pitch. It features long service life, high elasticity, and excellent resistance to UV radiation. It is laid as one piece using cold bonding with the provided adhesive.


Bracing


The building kit contains mounting brackets of galvanized flat steel including anchor bolts for attachment to the site-built foundation. They ensure secure connection to the subsurface.


  • Solid structure of glued laminate (BSH spruce)

  • Upright 12 x 12 cm

  • Purlin 12 x 12 cm

  • Rafter 6 x 12 cm

  • Roof boarding with EPDM foil

Material: Glulam, spruce
Color: Slate-grey
Color treatment: Stained
Size: 200 x 125 cm
Total width: 200 cm
Total length: 125 cm
Total height (front): 237 cm
Total height (behind): 237 cm
Roof shape: Flat roof
Material roof covering: Roof boards with EPDM rubber roofing
Color roofing: Black
Roof thickness: 19 mm
Roof surface: 2.5 m²
Roof edging: Wooden fascia with alu edges
Roof slope: -
Base surface: 2.5 m²
Building volume: 5.92 m³
Passage height (front): 220 cm
Thickness of posts: 12 x 12 cm
Post length: 215 cm
Post spacing (width): 176 cm
Number of posts: 2 Stück
Anchoring: Mounting brackets
Surface wood: 12.4 m²
Type of installation: Wall mounting
delivery time: 6 weeks
Number of packages: 1
package weight 1: 125 kg
packaging width 1: 220 cm
packaging height 1: 40 cm
packaging length 1: 120 cm
Total weight: 125 kg
Not inclusiv: Dowels for wall mounting
Garantie: 5 years according to our warranty conditions
delivery Note: Road that must support a 38t truck (Germany, mainland)

Accessories

Srews for wall mounting size 1
Practical complete set for wall mounting SKAN HOLZ terrace roofs or canopies to 327 cm width. consisting of :400 mm threaded rod in 12 mm diametercapped nutswashersperforated sleeves in 20 mm diametertwo-component adhesive mortarIntended for uninsulated sand-lime brick, honeycomb-brick and concrete masonry. Computation of quantities based on spacing between individual mountings of 50 cm.Set for wall mountingSize 1consisting of 400 mm threaded rod in 12 mm diameterIncluding two-component adhesive mortar

€119.00*
Side wall made of slats 113 x 217 cm, spruce, slate grey
Side wall made of slats for installation in a SKAN HOLZ canopyThe walls consist of loosely supplied slats, which are screwed together with battens.Product featuresWidth: 113 cmHeight: 217 cmThickness of the slats: 4.0 x 4.0 cmThickness of the slats: 1.6 x 4.0 cmMaterial: Nordic spruceColour-treated in slate greyPhoto galleryAny products shown for which the side panel is intended, colour treatment and decoration are not included in the scope of delivery. These are customer photos to give you an impression of the installed state.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Color treatmentThe color pre-treated parts of the building kit are treated with premium varnish and paint. This protects wood from blue stain and UV damage, as well as from swelling and fading, while still allowing the wooden texture to shine through. At the factory, parts are flow-coated twice on all sides with varnish and the excess subsequently brushed off.You can begin with assembly immediately upon delivery, there is no need for cumbersome priming and painting. Every building kit includes enough touch-up paint or varnish to repair damage and cover screws and cut surfaces at least two times.If you wish to further enhance the surface, lightly sand the visible surfaces and coat them with premium varnish or paint after assembly. Traces of storage on all-round color-treated components are due to technical reasons.Side wall made of slatsWind and privacy protectionNordic spruceColour-treated in slate greyFastening material included

€245.00*
Side wall made of slats 113 x 217 cm, spruce, white
Side wall made of slats for installation in a SKAN HOLZ canopyThe walls consist of loosely supplied slats, which are screwed together with battens.Product featuresWidth: 113 cmHeight: 217 cmThickness of the slats: 4.0 x 4.0 cmThickness of the slats: 1.6 x 4.0 cmMaterial: Nordic spruceColour-treated in whitePhoto galleryAny products shown for which the side panel is intended, colour treatment and decoration are not included in the scope of delivery. These are customer photos to give you an impression of the installed state.ConstructionThe construction is made of solid Nordic fir. We use technically-dried, solid spruce wood, scanned for flaws, sorted and weatherproofed by finger-joint bonding according to length. Small fissures, branches and slight twists reflect the character of the materials used.Color treatmentThe color pre-treated parts of the building kit are treated with premium varnish and paint. This protects wood from blue stain and UV damage, as well as from swelling and fading, while still allowing the wooden texture to shine through. At the factory, parts are flow-coated twice on all sides with varnish and the excess subsequently brushed off.You can begin with assembly immediately upon delivery, there is no need for cumbersome priming and painting. Every building kit includes enough touch-up paint or varnish to repair damage and cover screws and cut surfaces at least two times.If you wish to further enhance the surface, lightly sand the visible surfaces and coat them with premium varnish or paint after assembly. Traces of storage on all-round color-treated components are due to technical reasons.Side wall made of slatsWind and privacy protectionNordic spruceColour-treated in whiteFastening material included

€245.00*